From: <stingay_at_email.protected>
Date: Tue, 16 Nov 2004 01:10:01 +1100 (EST)

Hi Richard,

It's been somewhat difficult to follow the v162c1 setup instructions.
Here is what I've got running. Please review.

1650 MHz centre frequency (1634 - 1650 MHz, 1650 -1666 MHz)

Note, bad interference at times across much of the 64 MHz band.

DAS profile VSOP.pro

S2 mode 32x4-2

No jumper cable

CATIE xx+yy xx-yy xx+yy xx-yy
      LCP RCP LCP RCP (i.e. LCP recorded)
      antennas 12345 12345 (750 m config)

reference antenna ca03 on w100

running v162c1_new.sch in CAOBS (seems to be doing pulsar stuff)

Tsys recorded every 60 seconds

Cheers, Steven

##=====================================================##
Dr Steven Tingay stingay_at_astro.swin.edu.au
Swinburne SKA Project Leader

Centre for Astrophysics and Supercomputing
Swinburne University of Technology
Mail No 31
P.O. Box 218, Hawthorn, Vic. 3122, Australia

ph: +61 3 9214 8758
fax: +61 3 9214 8797

http://astronomy.swin.edu.au/ska
##=====================================================##

On Tue, 15 Nov 2004, Richard Dodson wrote:

>Missed one change to the ATCA schedule. (setting the mode for hte pulsar
>to be PSR)
>
>Use v162c1_new (and then v156f1_new)
>
>Richard
>
>
Received on 2004-11-16 01:10:40