LBA Block schedule v1.1
- Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]
From: <Jim.Lovell_at_email.protected>
Date: Mon, 19 Sep 2005 10:23:54 +1000
Hi everyone,
A revised version of the LBA schedule (v1.1) is now on the LBA
Schedules page. Hopefully this is the final version but please send
any comments/corrections to me and Chris.
Notes for PIs:
--------------
** Please note that schedule files are due by Thursday Monday October
17 at the
latest **. Please direct any questions about the observations (including
schedule file preparation) to vlbiobs_at_atnf.<!--nospam-->csiro.au.
Please use NRAO SCHED to prepare your schedule files. SCHED is installed
on the Unix machines at ATNF or can be obtained from
ftp://ftp.aoc.nrao.edu/pub/sched/
Please prepare your schedule using a standard configuration unless you
have good reason not to. Standard configs are described at
http://www.atnf.csiro.au/vlbi/observing/lba_s2_configs.html
The corresponding SCHED configuration files are installed at ATNF or can
be obtained from the above URL.
When your files are ready, please upload them to
ftp://ftp.atnf.csiro.au/pub/people/vlbi/incoming including
your .key, .skd and .sum files plus any configuration files if you used
a non-standard config. Once the file is uploaded please notify the
observers at vlbiobs_at_atnf.<!--nospam-->csiro.au.
Cheers,
Jim
Date: Mon, 19 Sep 2005 10:23:54 +1000
Hi everyone,
A revised version of the LBA schedule (v1.1) is now on the LBA
Schedules page. Hopefully this is the final version but please send
any comments/corrections to me and Chris.
Notes for PIs:
--------------
** Please note that schedule files are due by Thursday Monday October
17 at the
latest **. Please direct any questions about the observations (including
schedule file preparation) to vlbiobs_at_atnf.<!--nospam-->csiro.au.
Please use NRAO SCHED to prepare your schedule files. SCHED is installed
on the Unix machines at ATNF or can be obtained from
ftp://ftp.aoc.nrao.edu/pub/sched/
Please prepare your schedule using a standard configuration unless you
have good reason not to. Standard configs are described at
http://www.atnf.csiro.au/vlbi/observing/lba_s2_configs.html
The corresponding SCHED configuration files are installed at ATNF or can
be obtained from the above URL.
When your files are ready, please upload them to
ftp://ftp.atnf.csiro.au/pub/people/vlbi/incoming including
your .key, .skd and .sum files plus any configuration files if you used
a non-standard config. Once the file is uploaded please notify the
observers at vlbiobs_at_atnf.<!--nospam-->csiro.au.
Cheers,
Jim
-- Dr Jim Lovell, Jim.Lovell_at_csiro.<!--nospam-->au CSIRO Australia Telescope National Facility Ph: (02) 6125 6715 c/o RSAA, Mt Stromlo Observatory, Fax: (02) 6125 0260 Cotter Road, Weston ACT 2611 Mobile: 0412 127364 Australia http://www.atnf.csiro.au/people/Jim.Lovell At Tidbinbilla Ph (02) 6201 7842 (RA Lab), x7800 (switch), x7940(shift) On 15/09/2005, at 4:35 PM, Chris Phillips wrote: > On Thu, 15 Sep 2005, Jim Lovell wrote: > > >> So do you mean 4 continuous hours? >> > > The time after v187a would be perfect... > > > >> >> -Jim >> >> -- >> Dr Jim Lovell, >> Jim.Lovell_at_csiro.<!--nospam-->au >> CSIRO Australia Telescope National Facility Ph: (02) 6125 >> 6715 >> c/o RSAA, Mt Stromlo Observatory, Fax: (02) 6125 >> 0260 >> Cotter Road, Weston ACT 2611 Mobile: 0412 >> 127364 >> Australia http://www.atnf.csiro.au/people/ >> Jim.Lovell >> At Tidbinbilla Ph (02) 6201 7842 (RA Lab), x7800 (switch), x7940 >> (shift) >> >> >> >> On 15/09/2005, at 2:19 PM, Chris Phillips wrote: >> >> >>> >>> >>> >>>> >>>> OK, no worries, I'll add it to the schedule. Chris, how much >>>> time do >>>> you need for your PCFS tests? I'll put in a placeholder for them >>>> and >>>> you can always cancel later if you end up not needing them. >>>> >>>> >>> >>> Few hours. Though we probable ant about 1hour after the change the >>> systems >>> back over. >>> >>> Cheers >>> Chris >>> >>> >> >> >Received on 2005-09-19 10:24:15