Re: schedules for August session
- Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]
From: Cormac Reynolds <c.reynolds_at_email.protected>
Date: Tue, 13 Aug 2013 12:03:33 +0800
hi,
I fixed the problem with v186c (which also affected v486b and v253c).
It was an error in the SCHED setup file for the Gbps stations. I have
redistributed the schedules, but the changes only affect the ATNF
stations.
cheers,
Cormac.
On 13 August 2013 11:47, Cormac Reynolds <c.reynolds_at_email.protected> wrote:
> hi Chris,
>
> I take it you mean v186c? Is it the channel order you are worried
> about (I think the frequencies are o.k., but agree the wiki assigns
> them to the wrong IFPOLs)? That's easily fixed.
>
> cheers,
> Cormac
>
> On 13 August 2013 11:39, <Chris.Phillips_at_email.protected
>> Hi Cormac
>>
>> There is something wrong with the v196c schedule - the wiki pages is not consistent with what is wanted. Mopra and ATCA will record the wrong frequencies I think with the current setup.
>>
>> Chers
>> Chris
>>
>> On 13/08/2013, at 1:32 PM, Cormac Reynolds wrote:
>>
>>> hi all,
>>>
>>> v186c has been distributed now.
>>>
>>> cheers,
>>> Cormac
>>>
>>> On 12 August 2013 19:19, Cormac Reynolds <c.reynolds_at_email.protected
>>>> hi all,
>>>>
>>>> the schedules for this session are on the wiki and have been
>>>> distributed, except v186c which is being revised and should be
>>>> available tomorrow.
>>>>
>>>> Please note that the user schedules now incorporate the fringe check
>>>> schedules, so start at the time designated for the fringe check. v255t
>>>> also has an accompanying separate fringe check schedule (vc213) to
>>>> test the second mode (I recommend fringe testing on vc213 before
>>>> switching to the main schedule to test the first mode). In other cases
>>>> the fringe check page on the wiki is unfilled.
>>>>
>>>> Also, most of the PIs have used the new 'intents' parameter in SCHED
>>>> to designate suitable fringe finder and ATCA phasing sources. I hope
>>>> this will prove useful for the observers.
>>>>
>>>> regards,
>>>> Cormac.
>>>>
>>>> --
>>>> ----------------------------------------------------
>>>> Cormac Reynolds
>>>> Phone: +61 8 9266 3785
>>>> Fax: +61 8 9266 9110
>>>> email: c.reynolds_at_email.protected
>>>> ----------------------------------------------------
>>>
>>>
>>>
>>> --
>>> ----------------------------------------------------
>>> Cormac Reynolds
>>> Phone: +61 8 9266 3785
>>> Fax: +61 8 9266 9110
>>> email: c.reynolds_at_email.protected
>>> ----------------------------------------------------
>>
>>
>
>
>
> --
> ----------------------------------------------------
> Cormac Reynolds
> Phone: +61 8 9266 3785
> Fax: +61 8 9266 9110
> email: c.reynolds_at_email.protected
> ----------------------------------------------------
Date: Tue, 13 Aug 2013 12:03:33 +0800
hi,
I fixed the problem with v186c (which also affected v486b and v253c).
It was an error in the SCHED setup file for the Gbps stations. I have
redistributed the schedules, but the changes only affect the ATNF
stations.
cheers,
Cormac.
On 13 August 2013 11:47, Cormac Reynolds <c.reynolds_at_email.protected> wrote:
> hi Chris,
>
> I take it you mean v186c? Is it the channel order you are worried
> about (I think the frequencies are o.k., but agree the wiki assigns
> them to the wrong IFPOLs)? That's easily fixed.
>
> cheers,
> Cormac
>
> On 13 August 2013 11:39, <Chris.Phillips_at_email.protected
>> Hi Cormac
>>
>> There is something wrong with the v196c schedule - the wiki pages is not consistent with what is wanted. Mopra and ATCA will record the wrong frequencies I think with the current setup.
>>
>> Chers
>> Chris
>>
>> On 13/08/2013, at 1:32 PM, Cormac Reynolds wrote:
>>
>>> hi all,
>>>
>>> v186c has been distributed now.
>>>
>>> cheers,
>>> Cormac
>>>
>>> On 12 August 2013 19:19, Cormac Reynolds <c.reynolds_at_email.protected
>>>> hi all,
>>>>
>>>> the schedules for this session are on the wiki and have been
>>>> distributed, except v186c which is being revised and should be
>>>> available tomorrow.
>>>>
>>>> Please note that the user schedules now incorporate the fringe check
>>>> schedules, so start at the time designated for the fringe check. v255t
>>>> also has an accompanying separate fringe check schedule (vc213) to
>>>> test the second mode (I recommend fringe testing on vc213 before
>>>> switching to the main schedule to test the first mode). In other cases
>>>> the fringe check page on the wiki is unfilled.
>>>>
>>>> Also, most of the PIs have used the new 'intents' parameter in SCHED
>>>> to designate suitable fringe finder and ATCA phasing sources. I hope
>>>> this will prove useful for the observers.
>>>>
>>>> regards,
>>>> Cormac.
>>>>
>>>> --
>>>> ----------------------------------------------------
>>>> Cormac Reynolds
>>>> Phone: +61 8 9266 3785
>>>> Fax: +61 8 9266 9110
>>>> email: c.reynolds_at_email.protected
>>>> ----------------------------------------------------
>>>
>>>
>>>
>>> --
>>> ----------------------------------------------------
>>> Cormac Reynolds
>>> Phone: +61 8 9266 3785
>>> Fax: +61 8 9266 9110
>>> email: c.reynolds_at_email.protected
>>> ----------------------------------------------------
>>
>>
>
>
>
> --
> ----------------------------------------------------
> Cormac Reynolds
> Phone: +61 8 9266 3785
> Fax: +61 8 9266 9110
> email: c.reynolds_at_email.protected
> ----------------------------------------------------
-- ---------------------------------------------------- Cormac Reynolds Phone: +61 8 9266 3785 Fax: +61 8 9266 9110 email: c.reynolds_at_email.protected----------------------------------------------------Received on 2013-08-13 14:03:35