Re: schedules for August session
- Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]
From: Cormac Reynolds <c.reynolds_at_email.protected>
Date: Wed, 14 Aug 2013 10:38:18 +0800
hi Jamie,
I changed the mode for Ceduna to 64 MHz. Other stations are unaffected.
cheers,
Cormac
On 13 August 2013 18:17, Jamie McCallum <Jamie.McCallum_at_email.protected> wrote:
> Hi Cormac,
> With the v252al schedule, is it possible to amend the setup to use
> the 64 MHz mode at Ceduna? With the cDisko bug fixed, it would make things
> much easier if Bev doesn't have to swap out the BG3 cable.
> Cheers,
> Jamie
>
>
> On 13/08/13 14:03, Cormac Reynolds wrote:
>>
>> hi,
>>
>> I fixed the problem with v186c (which also affected v486b and v253c).
>> It was an error in the SCHED setup file for the Gbps stations. I have
>> redistributed the schedules, but the changes only affect the ATNF
>> stations.
>>
>> cheers,
>> Cormac.
>>
>> On 13 August 2013 11:47, Cormac Reynolds <c.reynolds_at_email.protected
>>>
>>> hi Chris,
>>>
>>> I take it you mean v186c? Is it the channel order you are worried
>>> about (I think the frequencies are o.k., but agree the wiki assigns
>>> them to the wrong IFPOLs)? That's easily fixed.
>>>
>>> cheers,
>>> Cormac
>>>
>>> On 13 August 2013 11:39, <Chris.Phillips_at_email.protected
>>>>
>>>> Hi Cormac
>>>>
>>>> There is something wrong with the v196c schedule - the wiki pages is not
>>>> consistent with what is wanted. Mopra and ATCA will record the wrong
>>>> frequencies I think with the current setup.
>>>>
>>>> Chers
>>>> Chris
>>>>
>>>> On 13/08/2013, at 1:32 PM, Cormac Reynolds wrote:
>>>>
>>>>> hi all,
>>>>>
>>>>> v186c has been distributed now.
>>>>>
>>>>> cheers,
>>>>> Cormac
>>>>>
>>>>> On 12 August 2013 19:19, Cormac Reynolds <c.reynolds_at_email.protected
>>>>> wrote:
>>>>>>
>>>>>> hi all,
>>>>>>
>>>>>> the schedules for this session are on the wiki and have been
>>>>>> distributed, except v186c which is being revised and should be
>>>>>> available tomorrow.
>>>>>>
>>>>>> Please note that the user schedules now incorporate the fringe check
>>>>>> schedules, so start at the time designated for the fringe check. v255t
>>>>>> also has an accompanying separate fringe check schedule (vc213) to
>>>>>> test the second mode (I recommend fringe testing on vc213 before
>>>>>> switching to the main schedule to test the first mode). In other cases
>>>>>> the fringe check page on the wiki is unfilled.
>>>>>>
>>>>>> Also, most of the PIs have used the new 'intents' parameter in SCHED
>>>>>> to designate suitable fringe finder and ATCA phasing sources. I hope
>>>>>> this will prove useful for the observers.
>>>>>>
>>>>>> regards,
>>>>>> Cormac.
>>>>>>
>>>>>> --
>>>>>> ----------------------------------------------------
>>>>>> Cormac Reynolds
>>>>>> Phone: +61 8 9266 3785
>>>>>> Fax: +61 8 9266 9110
>>>>>> email: c.reynolds_at_email.protected
>>>>>> ----------------------------------------------------
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> ----------------------------------------------------
>>>>> Cormac Reynolds
>>>>> Phone: +61 8 9266 3785
>>>>> Fax: +61 8 9266 9110
>>>>> email: c.reynolds_at_email.protected
>>>>> ----------------------------------------------------
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> ----------------------------------------------------
>>> Cormac Reynolds
>>> Phone: +61 8 9266 3785
>>> Fax: +61 8 9266 9110
>>> email: c.reynolds_at_email.protected
>>> ----------------------------------------------------
>>
>>
>>
>>
>
Date: Wed, 14 Aug 2013 10:38:18 +0800
hi Jamie,
I changed the mode for Ceduna to 64 MHz. Other stations are unaffected.
cheers,
Cormac
On 13 August 2013 18:17, Jamie McCallum <Jamie.McCallum_at_email.protected> wrote:
> Hi Cormac,
> With the v252al schedule, is it possible to amend the setup to use
> the 64 MHz mode at Ceduna? With the cDisko bug fixed, it would make things
> much easier if Bev doesn't have to swap out the BG3 cable.
> Cheers,
> Jamie
>
>
> On 13/08/13 14:03, Cormac Reynolds wrote:
>>
>> hi,
>>
>> I fixed the problem with v186c (which also affected v486b and v253c).
>> It was an error in the SCHED setup file for the Gbps stations. I have
>> redistributed the schedules, but the changes only affect the ATNF
>> stations.
>>
>> cheers,
>> Cormac.
>>
>> On 13 August 2013 11:47, Cormac Reynolds <c.reynolds_at_email.protected
>>>
>>> hi Chris,
>>>
>>> I take it you mean v186c? Is it the channel order you are worried
>>> about (I think the frequencies are o.k., but agree the wiki assigns
>>> them to the wrong IFPOLs)? That's easily fixed.
>>>
>>> cheers,
>>> Cormac
>>>
>>> On 13 August 2013 11:39, <Chris.Phillips_at_email.protected
>>>>
>>>> Hi Cormac
>>>>
>>>> There is something wrong with the v196c schedule - the wiki pages is not
>>>> consistent with what is wanted. Mopra and ATCA will record the wrong
>>>> frequencies I think with the current setup.
>>>>
>>>> Chers
>>>> Chris
>>>>
>>>> On 13/08/2013, at 1:32 PM, Cormac Reynolds wrote:
>>>>
>>>>> hi all,
>>>>>
>>>>> v186c has been distributed now.
>>>>>
>>>>> cheers,
>>>>> Cormac
>>>>>
>>>>> On 12 August 2013 19:19, Cormac Reynolds <c.reynolds_at_email.protected
>>>>> wrote:
>>>>>>
>>>>>> hi all,
>>>>>>
>>>>>> the schedules for this session are on the wiki and have been
>>>>>> distributed, except v186c which is being revised and should be
>>>>>> available tomorrow.
>>>>>>
>>>>>> Please note that the user schedules now incorporate the fringe check
>>>>>> schedules, so start at the time designated for the fringe check. v255t
>>>>>> also has an accompanying separate fringe check schedule (vc213) to
>>>>>> test the second mode (I recommend fringe testing on vc213 before
>>>>>> switching to the main schedule to test the first mode). In other cases
>>>>>> the fringe check page on the wiki is unfilled.
>>>>>>
>>>>>> Also, most of the PIs have used the new 'intents' parameter in SCHED
>>>>>> to designate suitable fringe finder and ATCA phasing sources. I hope
>>>>>> this will prove useful for the observers.
>>>>>>
>>>>>> regards,
>>>>>> Cormac.
>>>>>>
>>>>>> --
>>>>>> ----------------------------------------------------
>>>>>> Cormac Reynolds
>>>>>> Phone: +61 8 9266 3785
>>>>>> Fax: +61 8 9266 9110
>>>>>> email: c.reynolds_at_email.protected
>>>>>> ----------------------------------------------------
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> ----------------------------------------------------
>>>>> Cormac Reynolds
>>>>> Phone: +61 8 9266 3785
>>>>> Fax: +61 8 9266 9110
>>>>> email: c.reynolds_at_email.protected
>>>>> ----------------------------------------------------
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> ----------------------------------------------------
>>> Cormac Reynolds
>>> Phone: +61 8 9266 3785
>>> Fax: +61 8 9266 9110
>>> email: c.reynolds_at_email.protected
>>> ----------------------------------------------------
>>
>>
>>
>>
>
-- ---------------------------------------------------- Cormac Reynolds Phone: +61 8 9266 3785 Fax: +61 8 9266 9110 email: c.reynolds_at_email.protected----------------------------------------------------Received on 2013-08-14 12:39:45