From: <Jamie.Stevens_at_email.protected>
Date: Tue, 14 Jun 2016 05:58:11 +0000

Hi Cormac,

Thanks, I can see the schedules now.

cheers
Jamie


-----Original Message-----
From: Reynolds, Cormac (CASS, Kensington)
Sent: Tuesday, 14 June 2016 15:51
To: Stevens, Jamie (CASS, Narrabri) <Jamie.Stevens_at_csiro.au>
Cc: vlbiobs_at_email.protectedjamie.mccallum_at_utas.edu.au>
Subject: Re: Schedule for tomorrow

I thought I had, but I have done it again now.

cheers,
Cormac.

On 14/06/16 13:26, Stevens, Jamie (CASS, Narrabri) wrote:
> Hi Cormac,
>
> ATCA and Mopra have not received a copy of the v530a schedule - have
> you copied it across?
>
> cheers
> Jamie
>
>
> -----Original Message-----
> From: owner-vlbiobs_at_email.protectedro.au [mailto:owner-vlbiobs_at_atnf.csiro.au]
> On Behalf Of Cormac Reynolds
> Sent: Tuesday, 14 June 2016 12:37
> To: Jamie McCallum <jamie.mccallum_at_utas.edu.au>
> Cc: vlbiobs_at_atnf.csiro.au
> Subject: Re: Schedule for tomorrow
>
> hi Jamie,
>
> I found an error in the setup. I've fixed and redistributed it. Please
> make sure you have PI revision 7.0 and test that this version is o.k.
>
> cheers,
> Cormac.
>
> On 13/06/16 19:30, Jamie McCallum wrote:
> > Hi Cormac,
> > I've just tried to drudg the vc311 schedule for Hobart and
> > it's failing with these errors:
> >
> > oper_at_email.protectedvc311.vex
> > drudg_rdctl: Reading system control file /usr2/control/skedf.ctl
> > $SCRATCH $PRINT $MISC drudg_rdctl: Error parsing line:
> > dbbc_if_targets 40000 40000
> > DRUDG: Experiment Preparation Drudge Work (NRV & JMGipson
> > 2015Aug31)
> > Version: 9.11.08
> > Opening file vc311.vex for schedule vc311.vex
> > VREAD01 -- Got a VEX file to read, VEX_rev = 1.5;.
> > $EXPER
> > $STATIONS
> > $MODES
> > Found mode: sess216.K1024lba
> > VMOINP06 - Error getting $TRACKS information for mode
> > sess216.K1024lba station At
> > iret= -3 ierr= 1
> > ERRORMSG01 -3 = not found
> > ERRORMSG02 1 = S2 record mode
> > VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> > modesess216.K1024lba station At
> > iret= -3 ierr= 1
> > ERRORMSG01 -3 = not found
> > ERRORMSG02 1 = S2 group order
> > VMOINP06 - Error getting $TRACKS information for mode
> > sess216.K1024lba station Mp
> > iret= -3 ierr= 1
> > ERRORMSG01 -3 = not found
> > ERRORMSG02 1 = S2 record mode
> > VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> > modesess216.K1024lba station Mp
> > iret= -3 ierr= 1
> > ERRORMSG01 -3 = not found
> > ERRORMSG02 1 = S2 group order
> > VREAD02 - Error reading modes.
> > $SOURCES
> >
> > Does DiFX parse this VEX file? If it's just drudg, I'm happy to run
> > the fringe-check recordings of vc311 manually. The v530a experiment
> > drudges correctly with no reported errors.
> > Cheers,
> > Jamie
> >
> >
> > On 13/06/16 14:19, Cormac Reynolds wrote:
> >> hi,
> >>
> >> the schedule for v530a and associated fringe check v311 are on the
> >> wiki and have been distributed. At-Mp-Ho (+EVN) participating.
> >>
> >> Jon, I'm assuming the EVN will take care of your fringe check for
> >> this one, but let me know if you need to join this (will require a
> >> change of source for vc311).
> >>
> >> cheers,
> >> Cormac.
> >>
> >
> >
> >
> > University of Tasmania Electronic Communications Policy (December,
> 2014).
> > This email is confidential, and is for the intended recipient only.
> > Access, disclosure, copying, distribution, or reliance on any of it
> > by anyone outside the intended recipient organisation is prohibited
> > and may be a criminal offence. Please delete if obtained in error
> > and email confirmation to the sender. The views expressed in this
> > email are not necessarily the views of the University of Tasmania,
> > unless clearly intended otherwise.
> >
>

Received on 2016-06-14 15:58:12