ATUC Videocon Setup

Audio and video conferencing will be provided using the AARNet "MCU". This has the advantage of allowing users to connect via their laptop using "EVO". Note however there may be volume problems with this setup so usage via EVO is not guaranteed at this stage

Please contact Chris Phillips well before the meeting if you plan on using these facilities.
We need to ensure we have enough resources booked



Hardware videcon connection

  • Tell your videocon system to "call" 202.158.196.20 or +61262112616 if using ISDN
  • Either enter the meeting ID 61262112616# or select "far-end camera control" and navigate using the up/down arrows and select the meeting "CSIRO-CASS-ATUC" and enter using the "right" arrow. If entering the meeting ID, you may have to press # before the number as well as at the end.

Audio connection

Phone +61262112616

Connection from a computer

Using the client software EVO you can connect from your own computer

  • Point your web browser to http://evo.arcs.org.au/evoAU/
  • Click the register button and follow the instructions
  • From the main EVO webpage, click "Start EVO", wait to connected and authenticate.
  • Select the menu that looks like a phone between "Koala" and "Meetings" and select "Call H.323/SIP Client"
  • Enter the address 61262112616@202.158.196.20
  • Click the green phone symbol
  • IMPORTANT: Mute your microphone from the "EVO Koala" window. (Unless you want to speak!)
  • We do not need to see you either so turn off your camera also


Meetings
Public