User Tools

Site Tools


lbaops:atcanotes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:atcanotes [2016/07/29 12:32]
cormac
lbaops:atcanotes [2016/07/29 12:44] (current)
cormac
Line 145: Line 145:
 -> ''​abph X X'' ​ - The AB phase offset to get circular pol from the tied array. See the table below for correct settings for different frequencies. -> ''​abph X X'' ​ - The AB phase offset to get circular pol from the tied array. See the table below for correct settings for different frequencies.
  
-** for hybrid mode, abph in IF1 should be 0, and refer to table below for appropriate value for IF2 for the current observing frequency.+** for hybrid mode, abph in IF1 should be 0, and refer to table below for appropriate value for IF2 for the current observing frequency.**
  
   *  Check that the delays and phases look stable. You may want to average some of the spectral points together to get a better delay solution. For example, in cacor:   *  Check that the delays and phases look stable. You may want to average some of the spectral points together to get a better delay solution. For example, in cacor:
lbaops/atcanotes.txt · Last modified: 2016/07/29 12:44 by cormac