User Tools

Site Tools


lbaops:dashints

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:dashints [2008/06/06 04:12]
stingay
lbaops:dashints [2015/12/18 16:38] (current)
Line 1: Line 1:
-====  DAS GUI will not start\\ ==== +====  DAS GUI freezes ==== 
-\\ + 
-Check DAS module has loaded. E.g:\\ +^C the (correct) DAS "​log"​ and restart. Restart monitoring but don't reconfigure the hardware 
-\\ + 
- ​cavsi1:​~>​ lsmod | grep ds\\ +====  DAS GUI will not start ==== 
- ​ds ​                    ​10356 ​ 4 \\ + 
-\\ +Check DAS module has loaded. E.g: 
-If not try:\\ + 
-\\ + ​cavsi1:​~>​ lsmod | grep ds 
- su\\ + ​ds ​                    ​10356 ​ 4  
- /​etc/​init.d/​ds\\ + 
-\\ +If not try: 
-\\ + 
-====  DAS gives communications error in purple popup window on first config after power cycle\\ ==== + su 
-\\ + /​etc/​init.d/​ds 
-Try a second time\\ + 
-\\ + 
-====  DAS shows no flashing "​rx"​ and "​busy"​ lights on front panel of the dataset module.\\ ==== +====  DAS gives communications error in purple popup window on first config after power cycle ==== 
-\\ + 
-Bandpass on those channels will look crap.\ +Try a second time 
-\ + 
-Force the data set to load.  Chris knows how.+====  DAS shows no flashing "​rx"​ and "​busy"​ lights on front panel of the dataset module. ==== 
 + 
 +Bandpass on channels ​from that DAS will look crap.  DAS GUI will still work. 
 + 
 +Try a reset on the module. 
 + 
 +Try a power cycle. 
 + 
 +Try to force the data set to load.  Chris knows how to do it. 
lbaops/dashints.txt · Last modified: 2015/12/18 16:38 (external edit)