User Tools

Site Tools


lbaops:lbajun2007:v231aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbajun2007:v231aatlog [2007/06/20 19:56]
elenc
lbaops:lbajun2007:v231aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-Setup\\ +Setup 
------\\ +----- 
-\\ + 
-ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.\\ +ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m. 
-\\ + 
-(maximum baseline corresponds to ~90" at 13 cm.  The required field of view is less than ~20", ~1/4 of the tied array beam)\\ +(maximum baseline corresponds to ~90" at 13 cm.  The required field of view is less than ~20", ~1/4 of the tied array beam) 
-\\ + 
-Default polarisations should be used in CATIE\\ +Default polarisations should be used in CATIE 
-\\ + 
-Use "​channels 1 - 8" in disko\\ +Use "​channels 1 - 8" in disko 
-\\ + 
-Connect DAS1 (2284 MHz centre) and DAS2 (2316 MHz) directly to VSIC1 va the Huygens cable to cavsi1\ +Connect DAS1 (2284 MHz centre) and DAS2 (2316 MHz) directly to VSIC1 via the Huygens cable to cavsi1 
-\ + 
-Please start a new correlator log going for this experiment.\\ +Please start a new correlator log going for this experiment. 
-\\ + 
-Observing comments\\ +Observing comments 
-------------------\\ +------------------ 
-\\ + 
-\\+Recorded to ATNF V008 A1-B7 and ATNF V008 B1-B7.
  
  
lbaops/lbajun2007/v231aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)