User Tools

Site Tools


lbaops:lbajun2007:vx012aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbajun2007:vx012aatlog [2007/06/20 08:43]
adeller
lbaops:lbajun2007:vx012aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-OBSERVER'​S NOTES\\ +OBSERVER'​S NOTES 
-================\\ + 
-Recorded DAS 1 to ATNF V011 A1-7\\ +================ 
-         ​DAS 2 to ATNF V007 B1-7\\ + 
-\\ +Recorded DAS 1 to ATNF V007 B1-7 
-Really, really bad RFI in several of the bands made CACAL'​ing very difficult. ​ Thinkk we got it ok for all in the end.\\ + 
-\\ +Recorded ​DAS 2 to ATNF V011 A1-7 
-Only antennas 1-5 were tied and a new correlator log was not started - sorry.\\ + 
-\\ +Really, really bad RFI in several of the bands made CACAL'​ing very difficult. ​ Thinkk we got it ok for all in the end. 
-\\ + 
-INSTRUCTIONS\\ +Only antennas 1-5 were tied and a new correlator log was not started - sorry. 
-============\\ + 
-\\ + 
-ATCA can tie all 6 antennas (default circular pol: RCP, LCP)\\ +INSTRUCTIONS 
-\\ + 
-Record to the same disks that were used for the preceeding experiment. ​ Both experiments should fit on two sets of 500 GB disks.\\ +============ 
-\\ + 
-You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\\ +ATCA can tie all 6 antennas (default circular pol: RCP, LCP) 
-\\ + 
-1band 64\\ +Record to the same disks that were used for the preceeding experiment. ​ Both experiments should fit on two sets of 500 GB disks. 
-2band 64\\ + 
-\\ +You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using: 
-scan 1\\ + 
-\\ +1band 64 
-1freq 1264\\ +2band 64 
-2freq 1312\\ + 
-\\ +scan 1 
-scan 2\\ + 
-\\ +1freq 1264 
-1freq 1364\\ +2freq 1312 
-2freq 1412\\ + 
-\\ +scan 2 
-scan 3\\ + 
-\\ +1freq 1364 
-1freq 1464\\ +2freq 1412 
-2freq 1512\\ + 
-\\ +scan 3 
-Use the same correlator config as used in vx012a.\\ + 
-\\+1freq 1464 
 +2freq 1512 
 + 
 +Use the same correlator config as used in vx012a. 
 Start a new correlator log for this experiment, please. Start a new correlator log for this experiment, please.
  
lbaops/lbajun2007/vx012aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)