User Tools

Site Tools


lbaops:lbajun2008:v212aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbajun2008:v212aatlog [2008/06/04 14:24]
stingay
lbaops:lbajun2008:v212aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-Record on one set of 7 x 500 GB disks (please note which set).\ +Record on one set of 7 x 500 GB disks (please note which set). 
-\ + 
-ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.\ +ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m. 
-\ + 
-(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam)\ +(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam) 
-\ + 
-Default polarisations should be used in CATIE\ +Default polarisations should be used in CATIE 
-\ + 
-Use "​channels 1 - 8" in disko\ +Use "​channels 1 - 8" in disko 
-\ + 
-Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1\ +Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1 
-\ + 
-Please start a new correlator log going for this experiment.\ +Please start a new correlator log going for this experiment. 
-\ + 
-Observing comments\+Observing comments 
 + 
 +data recorded to SWIN V003 A1-7 
  
  
lbaops/lbajun2008/v212aatlog.1212553498.txt.gz · Last modified: 2015/12/18 16:38 (external edit)