User Tools

Site Tools


lbaops:lbajun2008:v212aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:lbajun2008:v212aatlog [2008/06/04 14:20]
stingay
lbaops:lbajun2008:v212aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.\\ +Record on one set of 7 x 500 GB disks (please note which set). 
-\\ + 
-(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam)\\ +ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m. 
-\\ + 
-Default polarisations should be used in CATIE\\ +(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam) 
-\\ + 
-Use "​channels 1 - 8" in disko\\ +Default polarisations should be used in CATIE 
-\\ + 
-Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1\\ +Use "​channels 1 - 8" in disko 
-\\ + 
-Please start a new correlator log going for this experiment.\\ +Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1 
-\\ + 
-Observing comments\\+Please start a new correlator log going for this experiment. 
 + 
 +Observing comments 
 + 
 +data recorded to SWIN V003 A1-7 
  
  
lbaops/lbajun2008/v212aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)