User Tools

Site Tools


lbaops:lbalogs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbalogs [2008/07/14 11:53]
chris.phillips
lbaops:lbalogs [2015/12/18 16:39] (current)
Line 17: Line 17:
 =====  ATCA ===== =====  ATCA =====
  
-Onsource flagging ​is not currently ​available. ​The first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan. +Onsource flagging available ​via a link on the experiment specific wikiPre-CABB, the first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan.  
 + 
 +====  Pre-CABB ====
  
 Tsys monitoring logs are stored at: Tsys monitoring logs are stored at:
Line 25: Line 27:
 Files are named by the start date and time of the monitoring. Any individual log may contain multiple experiments and span multiple days. It is possible (not rare) that the Tsys monitoring may be restarted during an experiment. The PI should generally look for the log file most recently started before there experiment (and check non were started during the experiment). The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it...  Files are named by the start date and time of the monitoring. Any individual log may contain multiple experiments and span multiple days. It is possible (not rare) that the Tsys monitoring may be restarted during an experiment. The PI should generally look for the log file most recently started before there experiment (and check non were started during the experiment). The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it... 
  
-=====  ​Mopra =====+====  ​CABB ====
  
-Onsource flagging in AIPS UVFLG form is available directly on the wiki. Contact Chris Phillips if it is not working ​for your experiment. Note that you probably need to also flag the first few seconds of every scan.+Unfortunately,​ since CABB was introduced no (meaningful) Tsys measurements can be measured ​for ATCA.
  
-Tsys monitoring logs are stored at+=====  Mopra =====
  
- ​ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​cal/​mopra+Onsource flagging in AIPS UVFLG form is available directly on the experiment specific wikiContact Chris Phillips if it is not working for your experimentNote that you probably need to also flag the first few seconds of every scan.
  
-Files are named starting with the experiment ​code. If the observing software had to be restarted a new logfile is generated so their may be multiple files. The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it..+Tsys monitoring logs are also available from the experiment ​wiki.
  
 =====  Parkes ===== =====  Parkes =====
lbaops/lbalogs.txt · Last modified: 2015/12/18 16:39 (external edit)