User Tools

Site Tools


lbaops:lbamar2007:v209aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbamar2007:v209aatlog [2007/03/21 12:21]
elenc
lbaops:lbamar2007:v209aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-Setup\\ +Setup 
------\\ +----- 
-\\ + 
-ATCA tied array should use antennas 345 in CATIE (CA03, CA04 and CA05) - this gives a maximum baseline of 291m.\\ +ATCA tied array should use antennas 345 in CATIE (CA03, CA04 and CA05) - this gives a maximum baseline of 291m. 
-\\ + 
-(maximum baseline corresponds to 2" ​at 13 cm.  The required field of view is less than 30 arcsec, ~1/4 of the tied array beam)\ +(maximum baseline corresponds to 2' ​at 13 cm.  The required field of view is less than 30", ~1/4 of the tied array beam) 
-\ + 
-Default polarisations should be used in CATIE\\ +Default polarisations should be used in CATIE 
-\\ + 
-Use "​channels 1 - 8" in disko\\ +Use "​channels 1 - 8" in disko 
-\\ + 
-Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to cavsi1\\ +Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to cavsi1 
-\\ + 
-Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on cavsi1. ​ xraid0, xraid1, xraid2, xraid3\\ +Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on cavsi1. ​ xraid0, xraid1, xraid2, xraid3 
-\\ + 
-Observing comments\\+Observing comments
 ------------------ ------------------
 +
 +Recording on D1-7
 +
 +Reference antenna CA02  W102
 +
 +Tied CA03,​CA04,​CA05
 +
lbaops/lbamar2007/v209aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)