User Tools

Site Tools


lbaops:lbamar2008:vx014aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:lbamar2008:vx014aatlog [2008/03/25 21:29]
guest
lbaops:lbamar2008:vx014aatlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-ATCA should spend as much time setting up as it needs. If the gains\\ +ATCA should spend as much time setting up as it needs. If the gains 
-and the delays between polarisations are set correctly at ATCA the\\ +and the delays between polarisations are set correctly at ATCA the 
-D-term solution should be unitary. This is an important confirmation\\ +D-term solution should be unitary. This is an important confirmation 
-of the calibration. ​\\+of the calibration. ​ 
 + 
 +CACAL on array only for C01-5. CA06 was left out? 
 + 
 +Tied C12345. 
 + 
 +13:00 UT Started recordin on SWIN 004A 
 + 
 +15:59:50 Stopped for time check re false daylight saving issue. All ok. ~1m lost 
 + 
 +17:13 UT Re-phased array on 1934-638. A few large corrections,​ especially for CA05 (50deg). Most others around 10 degs or less.
  
  
lbaops/lbamar2008/vx014aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)