User Tools

Site Tools


lbaops:lbamay2005:vt03a3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbamay2005:vt03a3 [2005/05/17 11:00]
stingay
lbaops:lbamay2005:vt03a3 [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vt03a3 Setup:\\ =====+===== vt03a3 Setup: =====
  
-^Antennas ​          | At-Mp-Pa-Ho-Nz |\\ +^Antennas ​          | At-Mp-Pa-Ho-Nz | 
-^Start ​             | 139 22:​00:​00 ​  |\\ +^Start ​             | 139 22:​00:​00 ​  | 
-^Stop               | 140 01:​00:​00 ​  |\\ +^Stop               | 140 00:​00:​00 ​  | 
-^PI                 | Steven Tingay |\\ +^PI                 | Steven Tingay | 
-^Channel 1          | 1650 - 1666 MHz USB RCP  |\\ +^Channel 1          | 1650 - 1666 MHz USB RCP  | 
-^Channel 2          | 1650 - 1666 MHz USB LCP  |\\ +^Channel 2          | 1650 - 1666 MHz USB LCP  | 
-^Bandwidth ​         | 16 MHz         |\\ +^Bandwidth ​         | 16 MHz         | 
-^Recorder ​          | Disk (DAS direct to VSIC)             |\\ +^Recorder ​          | Disk (DAS direct to VSIC)             | 
-^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-1IF-2p-a.html|at16s.pro]] |\\ +^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-1IF-2p-a.html|at16s.pro]] | 
-\\ + 
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a3]]\\ +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a3]] 
-----\\ +---- 
-\\ + 
-===== Comments:\\ ===== +===== Comments: ===== 
-\\ + 
-ATCA and Mopra telescope schedules in place\\ +ATCA and Mopra telescope schedules in place 
-\\ + 
-Parkes .psn schedule at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a1\ +Parkes .psn schedule at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a3 
-\ + 
-Hobart VEX schedule at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a1\ +Hobart VEX schedule at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt03/​vt03a3 
-\ + 
-To set this experiment up:\\ +To set this experiment up: 
-\\ + 
-1) Connect DAS output to VSIC directly (no buggery cable), and then to recorder;\\ +1) Connect DAS output to VSIC directly (no buggery cable), and then to recorder; 
-\\ + 
-2) Change to a new directory;\\ +2) Change to a new directory;​ 
-\\ + 
-3) Start recording: vsib_record -t 3h -s 2005-05-19T22:​00:​00 -o vt03a3_<​antenna> ​\\+3) Start recording: vsib_record -t 2h -s 2005-05-19T22:​00:​00 -o vt03a3_<​antenna> ​
  
  
lbaops/lbamay2005/vt03a3.txt · Last modified: 2015/12/18 16:38 (external edit)