User Tools

Site Tools


lbaops:lbamay2006:vc008

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbamay2006:vc008 [2015/12/18 16:38] (current)
Line 1: Line 1:
 +===== vc008 Setup: =====
 +
 +^Description ​       | real-time fringe-check for v181a2 |
 +^Antennas ​          | At-Mp-Pa-Ho-Cd |
 +^Start ​             | 136 18:​30:​00 ​  |
 +^Stop               | 136 20:​35:​00 ​  |
 +^PI                 | LBA fringe-check |
 +^Channel 1          | ''​ IFP#1-LO 2252 - 2268 MHz USB RCP  ''​ |
 +^Channel 2          | ''​ IFP#1-HI 2268 - 2284 MHz USB RCP  ''​ |
 +^                   | IFP#2 not used with this setup |
 +^Skyfreq ​           | 2268.00 MHz |
 +^Bandwidth ​         | 16 MHz         |
 +^Recorder ​          | Disk through S2             |
 +^DAS Mode           | vsop.pro ([[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-b.html|telescope]]) |
 +^S2 Mode            | 32x4-2 ​        |
 +^Swap Cable         | out            |
 +
 +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​fringe-checks/​vc008]]
 +----
 +
 +===== Comments: =====
 +
 +**Check S2 time and mode**
 +
 +Record on whereever there is space
 +
 +Use RecordMode "​Channel 1,2" in disko (or -c ooxx in vsib_record)
 +
 +On S2 type "uic feedthru on" if not already enabled
 +
 +**ATCA**: Remember to re-tie the array
 +
 +===== Observing comments for each antenna: =====
 +
 +| [[.:​vc008atlog | At]] | [[.:​vc008mplog | Mp]] | [[.:​vc008palog | Pa]] | [[.:​vc008holog | Ho]] | [[.:​vc008cdlog | Cd]] |
 +
  
lbaops/lbamay2006/vc008.txt · Last modified: 2015/12/18 16:38 (external edit)