User Tools

Site Tools


lbaops:lbamay2006:vt09a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbamay2006:vt09a [2015/12/18 16:38] (current)
Line 1: Line 1:
 +===== vt09a Setup: =====
 +
 +^Description ​       | X-band geodesy |
 +^Antennas ​          | Cd-Mp-At-Ho-Pa |
 +^Start ​             | 133 08:​00:​00 ​  |
 +^Stop               | 133 20:​01:​47 ​  |
 +^PI                 | Chris Phillips |
 +^Channel 1          | ''​ IFP#1-LO 8409 - 8425 MHz USB RCP  ''​ |
 +^Channel 2          | ''​ IFP#2-LO 8457 - 8473 MHz USB RCP  ''​ |
 +^Sky Frequency ​     | 8417, 8465 MHz |
 +^Bandwidth ​         | 16 MHz         |
 +^Recorder ​          | S2             |
 +^DAS Mode           | at16s.pro (or equivalent) |
 +^S2 Mode            | 32x4-2 ​        |
 +^Swap Cable         | in            |
 +^Tape Change ​       | 133 13:​59:​44 ​  |
 +
 +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt09/​vt09a]]
 +----
 +
 +===== Comments: =====
 +
 +**Check S2 time**
 +
 +Single pol dual frequency setup required. Will need special DAS setup.
 +
 +Most antennas will need to feed Rcp (with a different LO frequency) into each IFP of the DAS). Narrabri will need to use the "​Dual-head"​ buggery cable (not the huygens cable) to connect both DAS into the S2.
 +
 +Schedules are on ftp area and have //not// been copied to observatories. PLEASE check schedule carefully. Tape stops may have to he removed from snap schedule after running drudge. Use the "​centred"​ DAS profile which us usually used for dual pol experiments. ​
 +
 +===== Observing comments for each antenna: =====
 +
 +| [[.:​vt09acdlog | Cd]] | [[.:​vt09amplog | Mp]] | [[.:​vt09aatlog | At]] | [[.:​vt09aholog | Ho]] | [[.:​vt09apalog | Pa]] |
 +
  
lbaops/lbamay2006/vt09a.txt · Last modified: 2015/12/18 16:38 (external edit)