User Tools

Site Tools


lbaops:lbanov2005:vt06a2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbanov2005:vt06a2 [2005/10/21 13:03]
stingay
lbaops:lbanov2005:vt06a2 [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vt06a2 Setup:\\ =====+===== vt06a2 Setup: ===== 
 + 
 +^Antennas ​          | At-Mp-Pa-Ho | 
 +^Start ​             | 308 12:​00:​00 ​  | 
 +^Stop               | 308 18:​00:​00 ​  | 
 +^PI                 | Adam Deller | 
 +^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  | 
 +^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  | 
 +^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  | 
 +^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  | 
 +^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  | 
 +^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  | 
 +^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  | 
 +^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  | 
 +^Bandwidth ​         | 16 MHz         | 
 +^Recorder ​          | Disk             | 
 +^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-a.html|vsop.pro]] | 
 + 
 +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06/​vt06a2]] 
 +---- 
 + 
 +===== Comments: ===== 
 +Connect DAS(s) directly to VSIC 
 + 
 +ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1.  Hobart will record only channels 1-4 (256 Mbps) 
 + 
 +ATCA and Mopra schedules are available on the machines at the telescopes. Parkes schedule available at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06a/​vt06a2/​. Hobart using vex file, also available at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06a/​vt06a2/​ 
 + 
 +Parkes: Form circular polarisations from linears using hardware hybrid 
 + 
 +Pks, ATCA, Mopra: the 1.4 TB generated by this experiment will not fit on a single xraid partition, so TWO vsib_record commands are required. ​ The first 1.5 hours will be recorded to the first Xraid partition (same partition as vt06a1, eg /​data/​xraid0/​vt06a2/​),​ the final 4.5 hours to the second Xraid partition (eg /​data/​xraid1/​vt06a2/​). ​ The commands will be: 
 + 
 +vsib_record -t 90m -s 2005-11-04T12:​00:​00 -m 2 -o vt06a2_<​antenna>,​ where <​antenna>​ = At,Mp,Pk 
 + 
 +Then, when this finishes at 13:30:00, cd ../​../​xraid1/​vt06a2/​ and: 
 + 
 +vsib_record -t 269m -s 2005-11-04T13:​31:​00 -m 2 -o vt06a2_<​antenna>,​ where <​antenna>​ = At,Mp,Pk (60 seconds gap to allow change of directory. ​ If any observatories miss the start, please ensure that the data is still being recorded on a 10 second boundary for ease of correlation) 
 + 
 +Hobart: record to the 4x400 internal drives (vt06a2/)
  
-^Antennas ​          | At-Mp-Pa-Ho |\\ 
-^Start ​             | 308 12:​00:​00 ​  |\\ 
-^Stop               | 308 18:​00:​00 ​  |\\ 
-^PI                 | Adam Deller |\\ 
-^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  |\\ 
-^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  |\\ 
-^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  |\\ 
-^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  |\\ 
-^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  |\\ 
-^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  |\\ 
-^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  |\\ 
-^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  |\\ 
-^Bandwidth ​         | 16 MHz         |\\ 
-^Recorder ​          | Disk             |\\ 
-^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-a.html|vsop.pro]] |\\ 
-\\ 
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06/​vt06a2]]\\ 
-----\\ 
-\\ 
-===== Comments:\\ ===== 
-Connect DAS(s) directly to VSIC\\ 
-\\ 
-ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1.  Hobart will record only channels 1-4 (256 Mbps)\\ 
-\\ 
-ATCA and Mopra schedules are available on the machines at the telescopes. Parkes schedule available at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06a/​vt06a2/​. Hobart using vex file, also available at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt06a/​vt06a2/​\\ 
-\\ 
-Parkes: Form circular polarisations from linears using hardware hybrid\\ 
-\\ 
-Pks, ATCA, Mopra: the 1.4 TB generated by this experiment will not fit on a single xraid partition, so TWO vsib_record commands are required. ​ These can both be started at the same time in different windows. ​ The first 1.5 hours will be recorded to the first Xraid partition (same partition as vt06a1, eg /​export/​xraid0/​vt06a2/​),​ the final 4.5 hours to the second Xraid partition (eg /​export/​xraid1/​vt06a2/​). ​ The commands will be:\ 
-\ 
-vsib_record -t 90m -s 2005-11-04T12:​00:​00 -m 2 -o vt06a2_<​antenna>,​ where <​antenna>​ = At,Mp,Pk\\ 
-\\ 
-vsib_record -t 270m -s 2005-11-04T13:​30:​10 -m 2 -o vt06a2_<​antenna>,​ where <​antenna>​ = At,Mp,Pk (10 seconds gap to allow first vsib_record to conclude)\ 
-\ 
-Hobart: record to the 4x400 internal drives (vt06a2/)\\ 
-\\ 
 vsib_record -t 6h -s 2005-11-04T12:​00:​00 -o vt06a2_Ho vsib_record -t 6h -s 2005-11-04T12:​00:​00 -o vt06a2_Ho
  
lbaops/lbanov2005/vt06a2.txt · Last modified: 2015/12/18 16:38 (external edit)