User Tools

Site Tools


lbaops:lbanov2007:vx012b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbanov2007:vx012b [2007/11/07 08:55]
stingay
lbaops:lbanov2007:vx012b [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vx012b Setup:\\ =====+===== vx012b Setup: =====
  
-^Description ​       | SETI VLBI on GL 581 Earth-like planet |\\ +^Description ​       | SETI VLBI on GL 581 Earth-like planet | 
-^Antennas ​          | At-Mp-Pa |\\ +^Antennas ​          | At-Mp-Pa | 
-^Start ​             | 316 21:​00:​00 ​  |\\ +^Start ​             | 316 21:​00:​00 ​  | 
-^Stop               | 317 04:​20:​00 ​  |\\ +^Stop               | 317 04:​20:​00 ​  | 
-^PI                 | Tingay |\\ +^PI                 | Tingay | 
-^Channel 1          | ''​ DAS #1 IFP#1 SWITCH BETWEEN: 8093 - 8157 MHz USB RCP AND 8193 - 8257 MHz USB RCP AND 8293 - 8357 MHz USB RCP  AND 8393 - 8457 MHz USB RCP AND 8493 - 8557 MHz USB RCP AND 8543 - 8657 MHz USB RCP''​ |\ +^Channel 1          | ''​ DAS #1 IFP#1 RCP USB: SWITCH BETWEEN: 8093 - 81578193 - 82578293 - 83578393 - 84578493 - 8557 and 8543 - 8657 MHz ''​ | 
-^Channel 2          | ''​ DAS #1 IFP#2 SWITCH BETWEEN: 8093 - 8157 MHz USB LCP AND 8193 - 8257 MHz USB LCP AND 8293 - 8357 MHz USB LCP AND 8393 - 8457 MHz USB LCP AND 8493 - 8557 MHz USB LCP AND 8543 - 8657 MHz USB LCP ''​ |\ +^Channel 2          | ''​ DAS #1 IFP#2 LCP USB: SWITCH BETWEEN: 8093 - 81578193 - 82578293 - 83578393 - 84578493 - 8557 and 8543 - 8657 MHz ''​ | 
-^Channel 3          | ''​ DAS #2 IFP#1 SWITCH BETWEEN: 8143 - 8207 MHz USB RCP  AND 8243 - 8307 MHz USB RCP AND 8343 - 8407 MHz USB RCP AND 8443 - 8507 MHz USB RCP AND 8543 - 8607 MHz USB RCP AND 8643 - 8707 MHz USB RCP''​ |\ +^Channel 3          | ''​ DAS #2 IFP#1 RCP USB: SWITCH BETWEEN: 8143 - 82078243 - 83078343 - 84078443 - 85078543 - 8607 and 8643 - 8707 MHz ''​ | 
-^Channel 4          | ''​ DAS #2 IFP#2 SWITCH BETWEEN: 8143 - 8207 MHz USB LCP  AND 8243 - 8307 MHz USB LCP AND 8343 - 8407 MHz USB LCP AND 8443 - 8507 MHz USB LCP AND 8543 - 8607 MHz USB LCP AND 8643 - 8707 MHz USB LCP''​ |\ +^Channel 4          | ''​ DAS #2 IFP#2 LSB USB: SWITCH BETWEEN: 8143 - 82078243 - 83078343 - 84078443 - 85078543 - 8607 and 8643 - 8707 MHz ''​ | 
-^DAS 1 Skyfreq ​      | SWITCH BETWEEN: 8125 MHz AND 8225 MHz AND 8325 MHz AND 8425 MHz AND 8525 MHz AND 8625 MHz |\ +^DAS 1 Skyfreq ​      | SWITCH BETWEEN: 81258225832584258525 and 8625 MHz | 
-^DAS 2 Skyfreq ​      | SWITCH BETWEEN: 8175 MHz AND 8275 MHz AND 8375 MHz AND 8475 MHz and 8575 MHz AND 8675 MHz |\ +^DAS 2 Skyfreq ​      | SWITCH BETWEEN: 8175827583758475, 8575 and 8675 MHz | 
-^Bandwidth ​         | 64 MHz         |\\ +^Bandwidth ​         | 64 MHz         | 
-^DAS Mode           | 64 MHz.pro |\\ +^DAS Mode           | 64 MHz.pro |
-\\ +
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vx012/​vx012b]]\\ +
-----\\ +
-\\ +
-===== Comments:\\ ===== +
-\\ +
-This is in essence the same experiment as vx012a, but over a larger frequency range, at a higher frequency.\\ +
-\\ +
-This experiment is set up to switch between six frequency setups, as listed in the table above. These setups cover a 600 MHz frequency range from 8.1 GHz to 8.7 GHz.\\ +
-\\ +
-Frequency switch information for Parkes will be provided by Chris Phillips. ​ Frequency switch information for ATCA and Mopra is contained in the observing schedules.\\ +
-\\ +
-Connect VSIC directly to DAS, using the "​BG3"​ cables for 1 Gbps recording.\\ +
-\\ +
-See comments for individual antennas below.\\ +
-\\ +
-===== Observing comments for each antenna:\\ =====+
  
-| [[.:​vx012batlog | At]] | [[.:​vx012bmplog | Mp]] | [[.:​vx012bpalog | Pa]] |\\ +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vx012/​vx012b]] 
-----\\ +---- 
-===== Observing Logs\\ ===== + 
-[[http://​www.atnf.csiro.au/​cgi-bin/​vlbi/​parkes-onsource.pl?​session=Nov2007&​start=316/​21:​00:​00&​end=317/​04:​20:​00| Parkes onsource flagging]]\\\\ +===== Comments: ===== 
-[[http://​www.atnf.csiro.au/​cgi-bin/​vlbi/​mopra_onsource.pl?​exper=vx012b| Mopra onsource flagging]]\\+ 
 +This is in essence the same experiment as vx012a, but over a larger frequency range, at a higher frequency. 
 + 
 +This experiment is set up to switch between six frequency setups, as listed in the table above. These setups cover a 600 MHz frequency range from 8.1 GHz to 8.7 GHz. 
 + 
 +Frequency switch information for Parkes will be provided by Chris Phillips. ​ Frequency switch information for ATCA and Mopra is contained in the observing schedules. 
 + 
 +Connect VSIC directly to DAS, using the "​BG3"​ cables for 1 Gbps recording. 
 + 
 +**ATCA:** See comments for individual antennas below. 
 + 
 +===== Observing comments for each antenna: ===== 
 + 
 +| [[.:​vx012batlog | At]] | [[.:​vx012bmplog | Mp]] | [[.:​vx012bpalog | Pa]] | 
 +---- 
 +===== Observing Logs ===== 
 +[[http://​www.atnf.csiro.au/​cgi-bin/​vlbi/​parkes-onsource.pl?​session=Nov2007&​start=316/​21:​00:​00&​end=317/​04:​20:​00| Parkes onsource flagging]]\\ 
 +[[http://​www.atnf.csiro.au/​cgi-bin/​vlbi/​mopra_onsource.pl?​exper=vx012b| Mopra onsource flagging]]
  
  
lbaops/lbanov2007/vx012b.txt · Last modified: 2015/12/18 16:38 (external edit)