User Tools

Site Tools


lbaops:lbanov2007:vx012batlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbanov2007:vx012batlog [2007/11/13 09:37]
guest
lbaops:lbanov2007:vx012batlog [2015/12/18 16:38] (current)
Line 1: Line 1:
-+OBSERVATIONS 
-OBSERVATIONS+ 
-=========\ +Started about 5~10 minutes late due to delays getting array cacal-ed at all freqs. 
-\ + 
-Started about 5~10 minutes late due to delays getting array cacal-ed at all freqs.\\ +Reference antenna ca03 (w113). Array in ew367 config.  
-\\ + 
-Recording on ATNF v008A (caxserv00) and SWIN v001B (caxserve01)\\ +Recording on ATNF v008A (caxserv00) and SWIN v001B (caxserve01) 
-\\ + 
-\\ +ATCA data 2007-11-12_2115.vx012b 
-\\ + 
-INSTRUCTIONS\ + 
-=========\ +INSTRUCTIONS 
-\ + 
-ATCA can tie 5 antennas (default circular pol: RCP, LCP)\\ +ATCA can tie 5 antennas (default circular pol: RCP, LCP) 
-\\ + 
-You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the six frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\\ +You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the six frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using: 
-\\ + 
-1band 64\\ +1band 64 
-2band 64\\ +2band 64 
-\\ + 
-scan 1\\ +scan 1 
-\\ + 
-1freq 8125\\ +1freq 8125 
-2freq 8175\\ +2freq 8175 
-\\ + 
-scan 2\\ +scan 2 
-\\ + 
-1freq 8225\\ +1freq 8225 
-2freq 8275\\ +2freq 8275 
-\\ + 
-scan 3\\ +scan 3 
-\\ + 
-1freq 8325\\ +1freq 8325 
-2freq 8375\\ +2freq 8375 
-\\ + 
-scan 4\\ +scan 4 
-\\ + 
-1freq 8425\\ +1freq 8425 
-2freq 8475\\ +2freq 8475 
-\\ + 
-scan 5\\ +scan 5 
-\\ + 
-1freq 8525\\ +1freq 8525 
-2freq 8575\\ +2freq 8575 
-\\ + 
-scan 6\\ +scan 6 
-\\ + 
-1freq 8625\\ +1freq 8625 
-2freq 8675\\ +2freq 8675 
-\\ + 
-Use the same correlator config as used in vx012b.\\ +Use the same correlator config as used in vx012b. 
-\\+
 Start a new correlator log for this experiment, please. Start a new correlator log for this experiment, please.
  
lbaops/lbanov2007/vx012batlog.txt · Last modified: 2015/12/18 16:38 (external edit)