User Tools

Site Tools


lbaops:onedasat512

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:onedasat512 [2007/02/28 14:26]
jlovell
lbaops:onedasat512 [2015/12/18 16:39] (current)
Line 1: Line 1:
-The [[http://​www.atnf.csiro.au/​vlbi/​evlbi/​recorder/​corrout.jpg | correlator output ports]] on the DAS can\\ +====== 2 x 64 MHz bandwidth (512 Mbps) from a single DAS ====== 
-be configured to output 2\\ + 
-bit 64 MHz data directly (with no digital filtering). This allows data\\ +The [[http://​www.atnf.csiro.au/​vlbi/​evlbi/​recorder/​corrout.jpg | correlator output ports]] on the DAS can 
-rates of 512 Mbps from a single DAS (twice that from the S2 output\\ +be configured to output 2 
-port). As the signal format from the correlator ports are different\\ +bit 64 MHz data directly (with no digital filtering). This allows data 
-from the S2 port a patch cable is needed to produce a pin assignment in\\ +rates of 512 Mbps from a single DAS (twice that from the S2 output 
-the S2 specs. The BG3a cable does this. This cable\\ +port). As the signal format from the correlator ports are different 
-has 3 inputs and one\\ +from the S2 port a patch cable is needed to produce a pin assignment in 
-output. Two of the inputs are 20 way twist and flat cables which\\ +the S2 specs. The BG3a cable does this. This cable 
-[[http://​www.atnf.csiro.au/​vlbi/​evlbi/​recorder/​bg3_connected.jpg | connect into the two correlator output ports on the back of the DAS]]\\ +has 3 inputs and one 
-(this supplies the sampled 64 MHz data from the two IFPs and the 32 MHz\\ +output. Two of the inputs are 20 way twist and flat cables which 
-reference clock from the first correlator output). The third input\\ +[[http://​www.atnf.csiro.au/​vlbi/​evlbi/​recorder/​bg3_connected.jpg | connect into the two correlator output ports on the back of the DAS]] 
-plugs into the S2 Csa output of the DAS to supply the 1 PPS tick. The 50\\ +(this supplies the sampled 64 MHz data from the two IFPs and the 32 MHz 
-way twist-and-flat output from the BG3a then plugs directly into the VSIC board, bypassing the external connector. For\\ +reference clock from the first correlator output). The third input 
-this recording mode, vsib_record needs to be run in mode "​2"​ (16 bits\\+plugs into the S2 output of the DAS to supply the 1 PPS tick. The 50 
 +way twist-and-flat output from the BG3a then plugs directly into the VSIC board, bypassing the external connector. For 
 +this recording mode, vsib_record needs to be run in mode "​2"​ (16 bits
 per sample). per sample).
  
lbaops/onedasat512.txt · Last modified: 2015/12/18 16:39 (external edit)