User Tools

Site Tools


lbaops:pcfshints

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:pcfshints [2006/11/15 07:35]
chris.phillips
lbaops:pcfshints [2015/12/18 16:39] (current)
Line 1: Line 1:
-===== Trouble Shooting\\ ===== +===== Trouble Shooting ===== 
-\\ + 
-==== PCFS time is wrong\\ ==== +==== PCFS time is wrong ==== 
-\\ + 
-Normally the PCFS syncronises ​its from from the S2 formatter. Typing the command\\ +Normally the PCFS synchronizes ​its time from from the S2 formatter. Typing the command: 
-\\ + 
- > sy=run setcl offset &\\ + > sy=run setcl offset & 
-\\ + 
-Will resynconise ​the time. If the S2 is not connected to the DAS (e.g. for disk recording) then use the command\\ +Will resynchronize ​the time. If the S2 is not connected to the DAS (e.g. for disk recording) then use the command 
-\\ + 
- > sy=run setcl cpu &\\ + > sy=run setcl cpu & 
-\\ + 
-==== PCFS time will not update (complains time is off by greater than 2 weeks)\\ ==== +==== PCFS time will not update (complains time is off by greater than 2 weeks) ==== 
-\\ + 
-Try rebooting the PC.+Try rebooting the PC. The PCFS time mechanism does not work if the PC has not been rebooted within the last 268 days. 
 + 
 +==== PCFS complains about missing 1 Hz ==== 
 + 
 +Plug the S2 into the DAS if not doing a disk based experiment 
lbaops/pcfshints.txt · Last modified: 2015/12/18 16:39 (external edit)