User Tools

Site Tools


lbaops:rtfchints

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:rtfchints [2008/06/07 20:08]
chris.phillips
lbaops:rtfchints [2015/12/18 16:39] (current)
Line 1: Line 1:
-=====  Fringe Checker (RtFC) problems\\ ===== +=====  Fringe Checker (RtFC) problems ===== 
-\\ + 
-[[http://​www.atnf.csiro.au/​vlbi/​evlbi/​software/​RtFC/​ | Documetation]]\\ +[[http://​www.atnf.csiro.au/​vlbi/​evlbi/​software/​RtFC/​ | Documetation]] 
-\\ + 
-====  Correlator runs but no fringes are plotted\\ ==== +====  Correlator runs but no fringes are plotted ==== 
-\\ + 
-Scroll up in the corr.pl and look for error messages. Things to check are\\ +Scroll up in the corr.pl and look for error messages. Things to check are 
-\\ + 
-  *  The antenna names in the .delay file match full antenna names in vex file. These are usually PARKES, ATCA, CEDUNA, MOPRA, TID70M_S2.\\ +  *  The antenna names in the .delay file match full antenna names in vex file. These are usually PARKES, ATCA, CEDUNA, MOPRA, TID70M_S2. 
-\\ + 
-  *  Write permission in directory\\ +  *  Write permission in directory 
-\\ + 
-  *  Try deleting all the .output files in the directory corresponding to the time you are checking\\ +  *  Try deleting all the .output files in the directory corresponding to the time you are checking 
-\\ + 
-====  No fringes\\ ==== +====  No fringes ==== 
-\\ + 
-http://​www.atnf.csiro.au/​vlbi/​evlbi/​software/​RtFC/​fringetrouble.html\ +Main.FringeTroubles 
-\ + 
-====  Obs.pl will not connect ​\\ ==== +====  Obs.pl will not connect ​ ==== 
-\\ + 
-You need to setup ssh tunnels of ports 7420 and 7426 (check) to green.ssi.swin.edu.au from "​localhost"​. Then set RTFC_CONTROL and RTFC_CORRELATOR to localhost. Best to edit /​home/​vlbi/​evlbi/​RtFC/​setup.csh and re-login.\\ +You make need to setup ssh tunnels of ports 7420 and 7426 (check) to green.ssi.swin.edu.au from "​localhost"​. Then set RTFC_CONTROL and RTFC_CORRELATOR to localhost. Best to edit /​home/​vlbi/​evlbi/​RtFC/​setup.csh and re-login. 
-\\ + 
-====  Cannot connect to pkvsi1\\ ==== +====  Cannot connect to pkvsi1 ==== 
-\\ + 
-Try pkvsi1-ext\\ +Try pkvsi1-ext 
-\\ + 
-====  Cannot connect to pkvsi1-ext\\ ==== +====  Cannot connect to pkvsi1-ext ==== 
-\\ + 
-Try pkvsi1\\ +Try pkvsi1 
-\\ + 
-====  Cannot connect to tidvsi\\ ==== +====  Cannot connect to tidvsi ==== 
-\\ + 
-You can only ssh from venice, vulcan, kaputar, pavo and green\\+You can only ssh from venice, vulcan, kaputar, pavo and green
  
  
lbaops/rtfchints.txt · Last modified: 2015/12/18 16:39 (external edit)