Output files:
Pass | File name | Description | Start date, UT range | Antennas | Polarizations | # subbands (AIPS IFs) | Bandwidth per IF (MHz) | Spectral channels per IF/pol | Corr. int. time (s) |
---|---|---|---|---|---|---|---|---|---|
v493a1 | V493A1.[0-4].FITS | 8200-8264 MHz | 2014-06-03, 0/15:05:10 - 0/23:55:30 | AK AT CD HO MP PA TI | RR LL RL LR | 8 | 8.0 MHz | 64 | 0.25 |
v493a2 | V493A2.FITS | 8264-8328 MHz | 2014-06-03, 0/15:05:14 - 0/23:55:30 | AT HO MP PA TI | RR LL | 8 | 8.0 MHz | 64 | 0.25 |
Two DAS set-up at ATNF stations – had to correlate in two passes. 8 MHz subbands used to handle mixed bandwidth recording (ASKAP records a single 64 MHz channel, other stations record 16 MHz channels).
Plots of autocorrelations
Comments:
Plots of uncalibrated amplitude and phase against frequency
Comments:
Plots of uncalibrated amplitude and phase against time
Comments:
Plots of cross-polarization amplitude and phase against frequency (not always available)
Comments:
Amplitude corrections from ACCOR
Comments:
Fringe-fit delay solutions
Comments: Unsolved problem with ATCA tied array in this session. Variable delay/rates, but tied array position used (W104) should have been correct.
Fringe-fit phase solutions
Comments:
Fringe-fit rate solutions
Comments:
Fringe-fit SNR
Comments:
Plots of Amplitude and phase against frequency with fringe-fit solutions applied
Comments:
Plots of Amplitude and phase against time with fringe-fit solutions applied
Comments:
Plots of autocorrelations
Comments:
Plots of uncalibrated amplitude and phase against frequency
Comments:
Plots of uncalibrated amplitude and phase against time
Comments:
Plots of cross-polarization amplitude and phase against frequency (not always available)
Comments:
Amplitude corrections from ACCOR
Comments:
Fringe-fit delay solutions
Comments:
Fringe-fit phase solutions
Comments:
Fringe-fit rate solutions
Comments:
Fringe-fit SNR
Comments:
Plots of Amplitude and phase against frequency with fringe-fit solutions applied
Comments:
Plots of Amplitude and phase against time with fringe-fit solutions applied
Comments: