Output files:
Pass | File name | Description | Start date, UT range | Antennas | Polarizations | # subbands (AIPS IFs) | Bandwidth per IF (MHz) | Spectral channels per IF/pol | Corr. int. time (s) |
---|---|---|---|---|---|---|---|---|---|
v561a | V561A.FITS | 2017-06-16, 0/22:52:01 - 2/21:59:59 | AT CD HH HO KE MP PA TD TI WW YG | RR | 16 | 16.0 MHz | 64 | 1.0 |
At: Observed only subbands 7,8,10,11 (recorder limitation).
Cd: No valid data after 2017y168d14h06m30s (Mark5 crash). Observed X-band only (no S/X Rx). Fringes only in subbands 7-11. Sensitivity variations in subbands 7-11 probably due to DBBC. Lack of fringes in subbands 12-16 likely an RF limitation.
Ho: No fringes in subband 5 due to RFI.
Mp: Observed only subbands 7,8,10,11 (recorder limitation).
Ti: DSS43 DVP. Observed ~14.5 hours in total. No data in subbands 1,4,5,6 (S-band) due to frequency setting error. No fringes in channels 12-16 (>8600 MHz) due to RF limitations.
Td: DSS36 LBADR 1/12:56-16:01. Observed only subbands 7,8,10,11 (recorder limitation)
Yg: Windstow sensor error: 03:00-03:12
Plots of autocorrelations
Comments:
Plots of uncalibrated amplitude and phase against frequency
Comments:
Plots of uncalibrated amplitude and phase against time
Comments:
Plots of cross-polarization amplitude and phase against frequency (not always available)
Comments:
Amplitude corrections from ACCOR
Comments:
Fringe-fit delay solutions
Comments:
Fringe-fit phase solutions
Comments:
Fringe-fit rate solutions
Comments:
Fringe-fit SNR
Comments:
Plots of Amplitude and phase against frequency with fringe-fit solutions applied
Comments:
Plots of Amplitude and phase against time with fringe-fit solutions applied
Comments: