User Tools

Site Tools


lbaops:atcacassini

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:atcacassini [2007/12/17 13:28]
chris.phillips
lbaops:atcacassini [2008/05/09 09:17]
chris.phillips
Line 1: Line 1:
-======  NASA/Cassini parallel recording at ATCA\\\ ====== +======  NASA/Cassini parallel recording at ATCA\ ====== 
-\\+
-=====  DAS Setup\\\ ===== +=====  DAS Setup\ ===== 
-\\+
-A fine tuner profile has been setup which user a type 2 8 MHz bandsplitter filter (2x8 MHz).\\+A fine tuner profile has been setup which user a type 2 8 MHz bandsplitter filter (2x8 MHz).\ 
-A 0.5 MHz type 1 filter is then tunable within the 8 MHz. To center the 0.5 MHz filter within the 8 MHz filter the fine tuner NCO oscillator should be set to 4 MHz.\\+A 0.5 MHz type 1 filter is then tunable within the 8 MHz. To center the 0.5 MHz filter within the 8 MHz filter the fine tuner NCO oscillator should be set to 4 MHz.\ 
-\\+
-  *  If the tone is above the DAS central frequency choose the profile ''cassini_0.5MHz_ft.pro''\\+  *  If the tone is above the DAS central frequency choose the profile ''cassini_0.5MHz_ft.pro''
-  *  If the tone is below the DAS central frequency ''cassini_0.5MHz_ft-lower.pro''\\+  *  If the tone is below the DAS central frequency ''cassini_0.5MHz_ft-lower.pro''
-\\+
-=====  Recorder\\\ ===== +=====  Recorder\ ===== 
-\\+
-cdisko currently does not support this mode of recording. Use (something like) the following command line\\+cdisko currently does not support this mode of recording. Use (something like) the following command line\ 
- > vsib-record -o cassini -w 0.5 -c oxox -t 6h -mk5 -x+ > vsib-record -o cassini -w 0.5 -c oxox -t 6h -mk5b -x
 +
 +=====  Viewing\ ===== 
 +
 +To see the signal "live"
 +
 + > cd <directory/where/vsib_record/is/recording\ 
 + > fauto -online -n 1024 
lbaops/atcacassini.txt · Last modified: 2015/12/18 16:38 (external edit)