User Tools

Site Tools


lbaops:atcacassini

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:atcacassini [2008/05/09 09:16]
chris.phillips
lbaops:atcacassini [2015/12/18 16:38]
Line 1: Line 1:
-====== ​ NASA/​Cassini parallel recording at ATCA\\ ====== +
-\\ +
-=====  DAS Setup\\ ===== +
-\\ +
-A fine tuner profile has been setup which user a type 2 8 MHz bandsplitter filter (2x8 MHz).\\ +
-A 0.5 MHz type 1 filter is then tunable within the 8 MHz. To center the 0.5 MHz filter within the 8 MHz filter the fine tuner NCO oscillator should be set to 4 MHz.\\ +
-\\ +
-  *  If the tone is above the DAS central frequency choose the profile ''​cassini_0.5MHz_ft.pro''​\\ +
-  *  If the tone is below the DAS central frequency ''​cassini_0.5MHz_ft-lower.pro''​\\ +
-\\ +
-=====  Recorder\\ ===== +
-\\ +
-cdisko currently does not support this mode of recording. Use (something like) the following command line\\ +
- > vsib-record -o cassini -w 0.5 -c oxox -t 6h -mk5b -x+
lbaops/atcacassini.txt · Last modified: 2015/12/18 16:38 (external edit)