User Tools

Site Tools


This is an old revision of the document!

NASA/Cassini parallel recording at ATCA\\

DAS Setup\\

A fine tuner profile has been setup which user a type 2 8 MHz bandsplitter filter (2×8 MHz).
A 0.5 MHz type 1 filter is then tunable within the 8 MHz. To center the 0.5 MHz filter within the 8 MHz filter the fine tuner NCO oscillator should be set to 4 MHz.

  • If the tone is above the DAS central frequency choose the profile
  • If the tone is below the DAS central frequency


cdisko currently does not support this mode of recording. Use (something like) the following command line
> vsib-record -o cassini -w 0.5 -c oxox -t 6h -mk5b -x

lbaops/atcacassini.1210288568.txt.gz · Last modified: 2015/12/18 16:38 (external edit)