User Tools

Site Tools


lbaops:dashints

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:dashints [2008/06/06 04:01]
chris.phillips
lbaops:dashints [2015/12/18 16:38] (current)
Line 1: Line 1:
-====  DAS GUI will not start\\\ ==== +====  DAS GUI freezes ==== 
-\\\ + 
-Check DAS module has loaded. E.g:\\\ +^C the (correct) DAS "log" and restart. Restart monitoring but don't reconfigure the hardware 
-\\\ + 
- cavsi1:~> lsmod | grep ds\\\ +====  DAS GUI will not start ==== 
- ds                     10356 \\\ + 
-\\\ +Check DAS module has loaded. E.g: 
-If not try:\\\ + 
-\\\ + cavsi1:~> lsmod | grep ds 
- su\\\ + ds                     10356  4  
- /etc/init.d/ds\\\ + 
-\\\ +If not try: 
-\\\ + 
-====  DAS gives XXXX error on first config after power cycle==== + su 
-\+ /etc/init.d/ds 
 + 
 + 
 +====  DAS gives communications error in purple popup window on first config after power cycle ==== 
 Try a second time Try a second time
 +
 +====  DAS shows no flashing "rx" and "busy" lights on front panel of the dataset module. ====
 +
 +Bandpass on channels from that DAS will look crap.  DAS GUI will still work.
 +
 +Try a reset on the module.
 +
 +Try a power cycle.
 +
 +Try to force the data set to load.  Chris knows how to do it.
 +
lbaops/dashints.1212688898.txt.gz · Last modified: 2015/12/18 16:38 (external edit)