User Tools

Site Tools


lbaops:lbaapr2009:vt11r

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbaapr2009:vt11r [2015/12/18 16:38] (current)
Line 1: Line 1:
 +===== vt11r Setup: =====
 +
 +^Description        | 100hr test on 26 March, C-band |
 +^Antennas           | Mp-Ho-Sh |
 +^Start              | 85 04:00:00   |
 +^Stop               | 85 08:30:00   |
 +^PI                 | Zsolt Paragi |
 +^Channel 1          | '' DAS #1 IFP#1-LO 4940 - 4956 MHz LSB RCP  '' |
 +^Channel 2          | '' DAS #1 IFP#1-HI 4956 - 4972 MHz USB RCP  '' |
 +^Channel 3          | '' DAS #1 IFP#2-LO 4940 - 4956 MHz LSB LCP  '' |
 +^Channel 4          | '' DAS #1 IFP#2-HI 4956 - 4972 MHz USB LCP  '' |
 +^Channel 5          | '' DAS #2 IFP#1-LO 4972 - 4988 MHz LSB RCP  '' |
 +^Channel 6          | '' DAS #2 IFP#1-HI 4988 - 5004 MHz USB RCP  '' |
 +^Channel 7          | '' DAS #2 IFP#2-LO 4972 - 4988 MHz LSB LCP  '' |
 +^Channel 8          | '' DAS #2 IFP#2-HI 4988 - 5004 MHz USB LCP  '' |
 +^DAS 1 Skyfreq      | 4956.00 MHz |
 +^DAS 2 Skyfreq      | 4988.00 MHz |
 +^Bandwidth          | 16 MHz         |
 +^DAS Mode           | mp16x2_f.pro ([[http://www.atnf.csiro.au/vlbi/dasmodes/16-2IF-1p-c.html|telescope]]) |
 +
 +Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt11/vt11r]]
 +----
 +
 +===== Comments: =====
 +
 +First part of test is local eVLBI Mopra-Hobart to test local setups.
 +
 +The main part of the test is an evlbi experiment to JIVE. JIVE will control the recorder remotely. A mark5 emulator
 +is needed for this to work. This is simply run (on the LBADR recorders) as:
 +
 + > mk5emu.pl
 +
 +This can be started well before the beginning of run and does not have to be stopped at the end - though it would be advisable to stop before the recorder is used for anything else.
 +
 +mk5emu.pl has the setup hardcoded. It will need to be modified if the setup changes. Specifically the following lines will be set:
 +
 +====  Mopra ====
 +
 + my $chans = 'xxxx';
 + my $bandwidth = 16;
 + my $vsib_mode = 2;
 +
 +=====  Hobart =====
 +
 + my $chans = 'oxox';
 + my $bandwidth = 16;
 + my $vsib_mode = 3;
 +
 +
 +
 +===== Observing comments for each antenna: =====
 +
 +| [[.:vt11rmplog | Mp]] | [[.:vt11rholog | Ho]] | [[.:vt11rshlog | Sh]] | 
 +----
 +===== Observing Logs =====
 +[[http://www.atnf.csiro.au/cgi-bin/vlbi/mopra_onsource.pl?exper=vt11r| Mopra onsource flagging]]\\
 +[[http://www.atnf.csiro.au/cgi-bin/vlbi/mopra_tsys.pl?exper=vt11r&plot=0| Mopra Tsys]]
 +([[http://www.atnf.csiro.au/cgi-bin/vlbi/mopra_tsys.pl?exper=vt11r&plot=1|plot]])
 +
 +
  
lbaops/lbaapr2009/vt11r.txt · Last modified: 2015/12/18 16:38 (external edit)