User Tools

Site Tools


lbaops:lbaaug2008:v255b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
lbaops:lbaaug2008:v255b [2008/08/05 10:21]
chris.phillips
lbaops:lbaaug2008:v255b [2008/08/07 12:24]
chris.phillips
Line 49: Line 49:
 ==== Hobart, Ceduna :  ==== ==== Hobart, Ceduna :  ====
  
-The 4 x 16 MHz bandpass setup will require feeding two separate LOs into IFP#1 and #2 on the DAS/​frequency translator and splitting the LCP signal so that is feed into both sides. ​ For Hobart the LOs should be set to 468 MHz (IFP#1) and 810 MHz (IFP#2) for the 4 x 16 MHz setup and 810 MHz for the 2 x 16 MHz setup. ​ For Ceduna, if you set the agilent to 11.1 GHz rather than 11.4 GHz, then you can use the same LOs as at Hobart.+The 4 x 16 MHz bandpass setup will require feeding two separate LOs into IFP#1 and #2 on the DAS/​frequency translator and splitting the LCP signal so that is feed into both sides. ​ For Hobart the LOs should be set to 468 MHz (IFP#1) and 808 MHz (IFP#2) for the 4 x 16 MHz setup and 808 MHz for the 2 x 16 MHz setup. ​ For Ceduna, if you set the agilent to 11.1 GHz rather than 11.4 GHz, then you can use the same LOs as at Hobart.
  
 ==== Hart :  ==== ==== Hart :  ====
Line 62: Line 62:
 | width=80% | width=80%
 ^ UT         | Channel selection ^ Parkes Frequency setup | ^ UT         | Channel selection ^ Parkes Frequency setup |
-| 02:​20-05:​57:​30 | 2,3,7,8 | 2008Aug_METH-split.cmd |+| 02:​20-05:​57:​30 | 3,4,7,8 | 2008Aug_METH-split.cmd |
 | 05:​57:​30-14:​36:​00 | 1-4     | 2008Aug_METH.cmd | | 05:​57:​30-14:​36:​00 | 1-4     | 2008Aug_METH.cmd |
 | 14:​36:​00-15:​24:​20 | 2,3,7,8 | 2008Aug_METH-split.cmd | | 14:​36:​00-15:​24:​20 | 2,3,7,8 | 2008Aug_METH-split.cmd |
lbaops/lbaaug2008/v255b.txt · Last modified: 2015/12/18 16:38 (external edit)