User Tools

Site Tools


v254b Setup:

Description More astrometric calibrators
Antennas At-Cd-Ho-Mp-Pa
Start 36 04:00:00
Stop 37 03:58:50
PI Leonid Petrov
Channel 1 IFP#1-LO 8256 - 8272 MHz USB RCP
Channel 2 IFP#1-HI 8272 - 8288 MHz USB RCP
Channel 3 IFP#2-LO 8512 - 8528 MHz USB RCP
Channel 4 IFP#2-HI 8528 - 8544 MHz USB RCP
Skyfreq DAS1 8272.00 MHz
Skyfreq DAS2 8528.00 MHz
Bandwidth 16 MHz
DAS Mode (telescope)



Mopra, ATCA, (Parkes LBADR)

  • Connect DAS to VSIC using “Huygens” Cable
  • Both DAS are used, but only Rcp recorded
  • Set Channel selection in cdisko to “Chans 1,2,5,6”
  • DAS#2 should be configured to be the higher frequency and connected to input#2 (input with clock lines connected).

Ceduna, (Hobart LBADR)

  • Connect DAS directly to VSIC
  • Record RCP only. This setup will require splitting the RF signal and setting up two IF chains, one into each IFP of the DAS.
IFP#1 Skyfreq 8272.00 RCP
IFP#2 Skyfreq 8528.00 RCP

Parkes and Hobart

  • Record on Mark5
  • Please check BCCc are tuned to record all frequencies in above table
  • Record in parallel on LBADR system as above

Observing comments for each antenna:

Observing Logs

lbaops/lbafeb2008/v254b.txt · Last modified: 2015/12/18 16:38 (external edit)