Sidebar
lbaops:lbafeb2009:vt11l
Table of Contents
vt11l Setup:
| Description | eVLBI test |
|---|---|
| Antennas | Mp-At-Pa-Ho |
| Start | 55 03:00:00 |
| Stop | 55 11:00:00 |
| PI | Chris Phillips |
| Channel 1 | DAS #1 IFP#1-LO 6542 - 6558 MHz USB RCP |
| Channel 2 | DAS #1 IFP#1-HI 6558 - 6574 MHz USB RCP |
| Channel 3 | DAS #1 IFP#2-LO 6542 - 6558 MHz USB LCP |
| Channel 4 | DAS #1 IFP#2-HI 6558 - 6574 MHz USB LCP |
| Channel 5 | DAS #2 IFP#1-LO 6574 - 6590 MHz USB RCP |
| Channel 6 | DAS #2 IFP#1-HI 6590 - 6606 MHz USB RCP |
| Channel 7 | DAS #2 IFP#2-LO 6574 - 6590 MHz USB LCP |
| Channel 8 | DAS #2 IFP#2-HI 6590 - 6606 MHz USB LCP |
| DAS 1 Skyfreq | 6558.00 MHz |
| DAS 2 Skyfreq | 6590.00 MHz |
| Bandwidth | 16 MHz |
| DAS Mode | vsop.pro (telescope) |
Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt11/vt11l
Comments:
This is an evlbi experiment. Chris will run recorders remotely.
Please start off with standard VLBI setup. Hobart will just record the DAS1 setup above.
At some stage Chris will request BG3 cables installed (on both DAS at Parkes/ATCA) and a 64 Mhz profile installed. No need to change IF/telescope setups.
Note the sky frequency is 100 MHz below the next experiment, which require standard VLBI cabling (ie no BG3).
Observing comments for each antenna:
Observing Logs
lbaops/lbafeb2009/vt11l.txt · Last modified: 2015/12/18 16:38 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
