ATNF VLBI Wiki

rg001c

Description	e-EVN ToO: third epoch J0948+0022; PI Marcello Giroletti
Antennas	Sh-Ks-Mp-Ho-At-Pa-Ef-Mc-On-Mh-Ys-Cm-Jb
Start	185 03:00:00
Stop	185 08:00:00
PI	Zsolt Paragi

Setup 512Mbps:

Station Modes	Mp Ho At Pa
Channel 1	`DAS #1 IFP#1-LO 22213 - 22229 MHz LSB RCP`
Channel 2	`DAS #1 IFP#1-HI 22229 - 22245 MHz USB RCP`
Channel 3	`DAS #1 IFP#2-LO 22213 - 22229 MHz LSB LCP`
Channel 4	`DAS #1 IFP#2-HI 22229 - 22245 MHz USB LCP`
Channel 5	`DAS #2 IFP#1-LO 22245 - 22261 MHz LSB RCP`
Channel 6	`DAS #2 IFP#1-HI 22261 - 22277 MHz USB RCP`
Channel 7	`DAS #2 IFP#2-LO 22245 - 22261 MHz LSB LCP`
Channel 8	`DAS #2 IFP#2-HI 22261 - 22277 MHz USB LCP`
DAS 1 Skyfreq	22229 MHz
DAS 2 Skyfreq	22261 MHz
Bandwidth	16 MHz
DAS Mode	Special

Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/rg001/rg001c

Comments:

This is an eVLBI experiment, with the data correlated at JIVE. Each station needs to run “mk5emu.pl” before the experiment and kill it after the experiment. cdisko can be left running but do not try and control the recorder.

Special, non standard, DAS modes are required.

If you need to change data rate, edit the lines in ~vlbi/bin/mk5emu.pl

my $chans = 'xxxx'; my $bandwidth = 16; my $vsib_mode = 3;

ATCA/Parkes/Mopa change mode to 2 for 256 Mbps Hobart change $chans to ooox (from oxox) for 64 Mbps)