Sidebar
lbaops:lbajun2007:v231aatlog
Setup
ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.
(maximum baseline corresponds to ~90“ at 13 cm. The required field of view is less than ~20”, ~1/4 of the tied array beam)
Default polarisations should be used in CATIE
Use “channels 1 - 8” in disko
Connect DAS1 (2284 MHz centre) and DAS2 (2316 MHz) directly to VSIC1 via the Huygens cable to cavsi1
Please start a new correlator log going for this experiment.
Observing comments
Recorded to ATNF V008 A1-B7 and ATNF V008 B1-B7.
lbaops/lbajun2007/v231aatlog.txt · Last modified: 2015/12/18 16:38 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
