User Tools

Site Tools


lbaops:lbajun2007:vx012aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision Both sides next revision
lbaops:lbajun2007:vx012aatlog [2007/06/17 21:37]
stingay
lbaops:lbajun2007:vx012aatlog [2007/06/20 08:43]
adeller
Line 1: Line 1:
-ATCA can tie all 6 antennas (default circular pol: RCP, LCP)\\\ +OBSERVER'S NOTES\\ 
-\\\ +================\\ 
-Record to the same disks that were used for the preceeding experiment.  Both experiments should fit on two sets of 500 GB disks.\\\ +Recorded DAS 1 to ATNF V011 A1-7\\ 
-\\\ +         DAS 2 to ATNF V007 B1-7\\ 
-You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\\\ +\\ 
-\\\ +Really, really bad RFI in several of the bands made CACAL'ing very difficult.  Thinkk we got it ok for all in the end.\\ 
-1band 64\\\ +\\ 
-2band 64\\\ +Only antennas 1-5 were tied and a new correlator log was not started - sorry.\\ 
-\\\ +\\ 
-scan 1\\\ +\\ 
-\\\ +INSTRUCTIONS\\ 
-1freq 1264\\\ +============\\ 
-2freq 1312\\\ +\\ 
-\\\ +ATCA can tie all 6 antennas (default circular pol: RCP, LCP)\\ 
-scan 2\\\ +\\ 
-\\\ +Record to the same disks that were used for the preceeding experiment.  Both experiments should fit on two sets of 500 GB disks.\\ 
-1freq 1364\\\ +\\ 
-2freq 1412\\\ +You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\\ 
-\\\ +\\ 
-scan 3\\\ +1band 64\\ 
-\\\ +2band 64\\ 
-1freq 1464\\\ +\\ 
-2freq 1512\\\ +scan 1\\ 
-\\\ +\\ 
-Use the same correlator config as used in vx012a.\\\ +1freq 1264\\ 
-\\\+2freq 1312\\ 
 +\\ 
 +scan 2\\ 
 +\\ 
 +1freq 1364\\ 
 +2freq 1412\\ 
 +\\ 
 +scan 3\\ 
 +\\ 
 +1freq 1464\\ 
 +2freq 1512\\ 
 +\\ 
 +Use the same correlator config as used in vx012a.\\ 
 +\\
 Start a new correlator log for this experiment, please. Start a new correlator log for this experiment, please.
  
lbaops/lbajun2007/vx012aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)