User Tools

Site Tools


lbaops:lbajun2007:vx012aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbajun2007:vx012aatlog [2007/06/20 08:43]
adeller
lbaops:lbajun2007:vx012aatlog [2007/06/20 08:43]
adeller
Line 1: Line 1:
-OBSERVER'S NOTES\\ +OBSERVER'S NOTES\ 
-================\\ +
-Recorded DAS 1 to ATNF V011 A1-7\\ +================\ 
-         DAS 2 to ATNF V007 B1-7\+
-\+Recorded DAS 1 to ATNF V011 A1-7\ 
-Really, really bad RFI in several of the bands made CACAL'ing very difficult.  Thinkk we got it ok for all in the end.\+
-\+         DAS 2 to ATNF V007 B1-7\ 
-Only antennas 1-5 were tied and a new correlator log was not started - sorry.\+
-\+Really, really bad RFI in several of the bands made CACAL'ing very difficult.  Thinkk we got it ok for all in the end.\ 
-\+
-INSTRUCTIONS\\ +Only antennas 1-5 were tied and a new correlator log was not started - sorry.\ 
-============\+
-\+
-ATCA can tie all 6 antennas (default circular pol: RCP, LCP)\+INSTRUCTIONS\ 
-\+
-Record to the same disks that were used for the preceeding experiment.  Both experiments should fit on two sets of 500 GB disks.\+============\ 
-\+
-You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\+ATCA can tie all 6 antennas (default circular pol: RCP, LCP)\ 
-\+
-1band 64\+Record to the same disks that were used for the preceeding experiment.  Both experiments should fit on two sets of 500 GB disks.\ 
-2band 64\+
-\+You will have to do a CACAL (including the 90 degree phase shift for circular polarisation) for each of the three frequency setups before the fringe-check can be done.  Make a schedule on a strong calibrator for the CACAL using:\ 
-scan 1\+
-\+1band 64\ 
-1freq 1264\+2band 64\ 
-2freq 1312\+
-\+scan 1\ 
-scan 2\+
-\+1freq 1264\ 
-1freq 1364\+2freq 1312\ 
-2freq 1412\+
-\+scan 2\ 
-scan 3\+
-\+1freq 1364\ 
-1freq 1464\+2freq 1412\ 
-2freq 1512\+
-\+scan 3\ 
-Use the same correlator config as used in vx012a.\+
-\\+1freq 1464\ 
 +2freq 1512\ 
 +
 +Use the same correlator config as used in vx012a.\ 
 +\
 Start a new correlator log for this experiment, please. Start a new correlator log for this experiment, please.
  
lbaops/lbajun2007/vx012aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)