User Tools

Site Tools


lbaops:lbajun2008:v212aatlog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbajun2008:v212aatlog [2008/06/04 14:20]
stingay
lbaops:lbajun2008:v212aatlog [2008/06/04 14:24]
stingay
Line 1: Line 1:
-ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.\+Record on one set of 7 x 500 GB disks (please note which set).\ 
-\+
-(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam)\+ATCA tied array should use antennas 12345 in CATIE (CA01, CA02, CA03, CA04 and CA05) - this gives a maximum baseline of 352m.\ 
-\+
-Default polarisations should be used in CATIE\+(maximum baseline corresponds to ~90" at 13 cm. The required field of view is less than ~20", ~1/4 of the tied array beam)\ 
-\+
-Use "​channels 1 - 8" in disko\+Default polarisations should be used in CATIE\ 
-\+
-Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1\+Use "​channels 1 - 8" in disko\ 
-\+
-Please start a new correlator log going for this experiment.\+Connect DAS1 (2242 MHz centre) and DAS2 (2274 MHz) directly to VSIC1 via the Huygens cable to cavsi1\ 
-\+
-Observing comments\\+Please start a new correlator log going for this experiment.\ 
 +
 +Observing comments\
  
  
lbaops/lbajun2008/v212aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)