User Tools

Site Tools


lbaops:lbalogs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbalogs [2008/07/14 11:53]
chris.phillips
lbaops:lbalogs [2010/10/12 11:38]
chris.phillips
Line 17: Line 17:
 =====  ATCA ===== =====  ATCA =====
  
-Onsource flagging is not currently available. ​The first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan. +Onsource flagging is not currently ​not available. ​Pre-CABB, the first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan.  
 + 
 +====  Pre-CABB ====
  
 Tsys monitoring logs are stored at: Tsys monitoring logs are stored at:
Line 24: Line 26:
  
 Files are named by the start date and time of the monitoring. Any individual log may contain multiple experiments and span multiple days. It is possible (not rare) that the Tsys monitoring may be restarted during an experiment. The PI should generally look for the log file most recently started before there experiment (and check non were started during the experiment). The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it...  Files are named by the start date and time of the monitoring. Any individual log may contain multiple experiments and span multiple days. It is possible (not rare) that the Tsys monitoring may be restarted during an experiment. The PI should generally look for the log file most recently started before there experiment (and check non were started during the experiment). The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it... 
 +
 +====  CABB ====
 +
 +For CABB data, Tsys measurements for individual antennas can be obtained from "​MoniCA"​. A simple script can be used calculate the effective Tied Array Tsys. Follow [[.:​cabbtsys | these ]]  instructions to extract Tsys from MoniCA - ATNF unix username/​password required.
  
 =====  Mopra ===== =====  Mopra =====
lbaops/lbalogs.txt · Last modified: 2015/12/18 16:39 (external edit)