User Tools

Site Tools


lbaops:lbalogs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbalogs [2010/10/12 11:38]
chris.phillips
lbaops:lbalogs [2015/12/18 16:39] (current)
Line 17: Line 17:
 =====  ATCA ===== =====  ATCA =====
  
-Onsource flagging ​is not currently not available. Pre-CABB, the first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan. +Onsource flagging available ​via a link on the experiment specific wiki. Pre-CABB, the first 3 cycles of every scan contains bad data, even if the slew time is short. As the typical cycle time is 10 seconds, the PI should flag the first 30 seconds of every scan. 
  
 ====  Pre-CABB ==== ====  Pre-CABB ====
Line 29: Line 29:
 ====  CABB ==== ====  CABB ====
  
-For CABB data, Tsys measurements ​for individual antennas ​can be obtained from "​MoniCA"​. A simple script can be used calculate the effective Tied Array Tsys. Follow [[.:​cabbtsys | these ]]  instructions to extract Tsys from MoniCA - ATNF unix username/​password required.+Unfortunately,​ since CABB was introduced no (meaningful) ​Tsys measurements can be measured for ATCA.
  
 =====  Mopra ===== =====  Mopra =====
  
-Onsource flagging in AIPS UVFLG form is available directly on the wiki. Contact Chris Phillips if it is not working for your experiment. Note that you probably need to also flag the first few seconds of every scan.+Onsource flagging in AIPS UVFLG form is available directly on the experiment specific ​wiki. Contact Chris Phillips if it is not working for your experiment. Note that you probably need to also flag the first few seconds of every scan.
  
-Tsys monitoring logs are stored at +Tsys monitoring logs are also available from the experiment ​wiki.
- +
- ​ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​cal/​mopra +
- +
-Files are named starting with the experiment ​code. If the observing software had to be restarted a new logfile is generated so their may be multiple files. The format is not in AIPS ANTAB format. The PI is needs to do this conversion themselves. Ask your local LBA expert how they do it..+
  
 =====  Parkes ===== =====  Parkes =====
lbaops/lbalogs.1286843936.txt.gz · Last modified: 2015/12/18 16:39 (external edit)