Sidebar
lbaops:lbamar2007:v209aatlog
Setup
ATCA tied array should use antennas 345 in CATIE (CA03, CA04 and CA05) - this gives a maximum baseline of 291m.
(maximum baseline corresponds to 2' at 13 cm. The required field of view is less than 30“, ~1/4 of the tied array beam)
Default polarisations should be used in CATIE
Use “channels 1 - 8” in disko
Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to cavsi1
Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on cavsi1. xraid0, xraid1, xraid2, xraid3
Observing comments
Recording on D1-7
Reference antenna CA02 W102
Tied CA03,CA04,CA05
lbaops/lbamar2007/v209aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
