User Tools

Site Tools



ATCA tied array should use antennas 345 in CATIE (CA03, CA04 and CA05) - this gives a maximum baseline of 291m.

(maximum baseline corresponds to 2' at 13 cm. The required field of view is less than 30“, ~1/4 of the tied array beam)

Default polarisations should be used in CATIE

Use “channels 1 - 8” in disko

Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to cavsi1

Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on cavsi1. xraid0, xraid1, xraid2, xraid3

Observing comments

Recording on D1-7

Reference antenna CA02 W102

Tied CA03,CA04,CA05

lbaops/lbamar2007/v209aatlog.txt · Last modified: 2015/12/18 16:38 (external edit)