Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+Recording DAS1 to cavsi1:/data/xraid1
+Recording DAS2 to cave-store:/data3
+IF1, going to DAS1, is connected to CA01.
+IF2, going to DAS2, is connected to CA03.
+The tied-array reference antenna is CA03, on N14.
+At the start of the recording at 22:52, both CA01 and CA03 were driven by the ATCA maser, as normal.
+At 23:39, the ATCA tied array was corrected to produce circular polarisation.
+At 23:57, the ATCA maser was removed from CA03.
+At 00:06, CA03 was reconfigured to use the Mopra-loop maser signal.
+At 02:15, recorders had finished at both observatories, and CA03 was reconfigured to use the normal ATCA maser signal.
+At 02:30, the recorders were restarted to get some reference data.
+-293 was quite low by the end of the experiment.

ATNF VLBI Wiki