This is an old revision of the document!
Recording DAS1 data to the local disks on cavsi1: “ATNF V007B”.
Recording DAS2 data to the Xcube disks.
Both DASes are using the profile 64MHz_n.pro, as recommended for USB data, which this data should be. DASpro says the data would be inverted though, so I have also enabled inverted recording on vsib_record.
The tied array is 12345, circular pols, reference antenna CA04 on W104 (for both DAS).
To ensure plenty of S/N for the CABB visibilities, I am using a cycle time of 10 seconds.