User Tools

Site Tools


lbaops:lbamarch2005:v156g1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbamarch2005:v156g1 [2005/03/12 22:16]
guest
lbaops:lbamarch2005:v156g1 [2005/03/13 07:10]
chris.phillips
Line 1: Line 1:
-===== v156g1 Setup:\\\ ===== 
- 
-^Antennas ​          | Mp-At-Cd-Ho-Pa |\\\ 
-^Start ​             | 72 10:​00:​00 ​  |\\\ 
-^Stop               | 72 21:​48:​00 ​  |\\\ 
-^Channel 1          | 4808 - 4824 MHz USB RCP  |\\ 
-^Channel 2          | 4808 - 4824 MHz USB LCP  |\\ 
-^Bandwidth ​         | 16 MHz         |\\\ 
-^Recorder ​          | S2             |\\ 
-^S2 Mode            | 32x4-2 ​        |\\\ 
-^DAS Mode           | at16s.pro ​     |\\ 
-^Buggary Cable      | in             |\\ 
-^Tape Change ​       | 72 15:​59:​00 ​  |\\\ 
-----\\\ 
-\\\ 
-===== Comments:​\\\ ===== 
-Dodson\\\ 
-\\\ 
-1302-638 has recently gone through it's eclipse, and it is known that there are frequency jumps when this occurs. Therefore timing observations of 1302-638 are worthwhile.\\\ 
-\\\ 
-Emailed comments (repeating comments):​\\\ 
-\\\ 
-Files at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1 (NOT INCOMING!!!!)\\\ 
-\\\ 
-  Exp. Code:  v156g1\\\ 
-\\\ 
- ​Notes: ​   PSR B1259-63 observation No 7. Part 1 @ 4816MHz\\\ 
-            Full pol. obs, i.e. both L&RCP. i.e buggery cable in\\\ 
-            Pulsar binned at AT (unless a problem). All in CATIE.\\\ 
-            CA CCC mode psr16_128-64. 12 hrs & 2 tape sets.\\\ 
-\\\ 
-   Both polarisations centred at 4816.\\\ 
-\\\ 
-    The experiment is ~ 12 hours so two sets of tapes are needed\\\ 
-  Tape change is at ~16UT \\\ 
-\\\ 
-  ATCA has a pulsar polyco but it maybe out of date. \\\ 
-\\\ 
-  So Parkes will have to collect the filter bank so we can find the\\\ 
-solution.\\\ 
-\\\ 
-------------\\ 
-\\ 
-Failure of one IF at Parkes leads to a 1 pol 2 IF mode (i.e. vsop.pro)\\ 
-Buggery out. Hart failure means we use >>>>​ RCP <<<<​\ 
-New files are on  ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1\\ 
-\\ 
 ===== v156g1 Setup:\ ===== ===== v156g1 Setup:\ =====
  
-^Antennas ​          | Mp-At-Cd-Ho-Pa |\+^Antennas ​          | Mp-At-Cd-Ho-Pa |\ 
-^Start ​             | 72 10:​00:​00 ​  |\+^Start ​             | 72 10:​00:​00 ​  |\ 
-^Stop               | 72 21:​48:​00 ​  |\+^Stop               | 72 21:​48:​00 ​  |\ 
-^Channel 1          | 4800 - 4816 MHz USB RCP  |\+^Channel 1          | 4800 - 4816 MHz USB RCP  |\ 
-^Channel 2          | 4816 - 4832 MHz USB RCP  |\+^Channel 2          | 4816 - 4832 MHz USB RCP  |\ 
-^Bandwidth ​         | 2x16 MHz         |\+^Bandwidth ​         | 16 MHz         |\ 
-^Recorder ​          | S2             ​|\+^Recorder ​          | S2            |\ 
-^S2 Mode            | 32x4-2 ​        |\+^S2 Mode            | 32x4-2 ​        |\ 
-^DAS Mode           | vsop.pro ​     |\+^DAS Mode           | vsop.pro ​     |\ 
-^Buggary Cable      | out             |\\ +^Buggary Cable      | out             |\ 
-^Tape Change ​       | 72 15:​59:​00 ​  |\\ +
-\\ +^Tape Change ​       | 72 15:​59:​00 ​  |\ 
-\\ +----
-Schedule at ATCA has been prepared, but nowhere else. \\+\ 
-Pulsar observations at ATCA require three things:\\+===== Comments:===== 
-\\+\ 
-The CONFIG to be a pulsar one (psr16_128_64 ​in this case),\ +**NOTE**: Setup has changed. Now Rcp only and frequency shift\ 
-MODE of the pulsar TARGET_NAME to be set to PSR and the polyco ​\\+
-timing solution to be in caccc as ~corr/​cor/​pulsar/​TARGET_NAME.polyco\\+Dodson\ 
-\\+
-These are setup\\+1302-638 has recently gone through it's eclipse, and it is known that there are frequency jumps when this occurs. Therefore timing observations of 1302-638 are worthwhile.\ 
-\\\+
 +Emailed comments (repeating comments):​\ 
 +
 +Files at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1 (NOT INCOMING!!!!)\ 
 +
 +  Exp. Code:  v156g1\ 
 +
 + ​Notes: ​   PSR B1259-63 observation No 7. Part 1 @ 4816MHz\ 
 +            Full pol. obs, i.e. both L&RCP. i.e buggery cable in\ 
 +            Pulsar binned at AT (unless a problem). All in CATIE.\ 
 +            CA CCC mode psr16_128-64. 12 hrs & 2 tape sets.\ 
 +
 +   Both polarisations centred at 4816.\ 
 +
 +    The experiment is ~ 12 hours so two sets of tapes are needed\ 
 +  Tape change is at ~16UT \ 
 +
 +  ATCA has a pulsar polyco but it maybe out of date. \ 
 +
 +  So Parkes will have to collect the filter bank so we can find the\ 
 +solution.\ 
 +
 +
 +Schedule at ATCA has been prepared, but nowhere else. \ 
 +Pulsar observations at ATCA require three things:\ 
 +
 +The CONFIG to be a pulsar one (psr16_128-64 ​in this case),\ 
 +MODE of the pulsar TARGET_NAME to be set to PSR and the polyco \ 
 +timing solution to be in caccc as ~corr/​cor/​pulsar/​TARGET_NAME.polyco\ 
 +
 +These are setup\ 
 +\
  
  
lbaops/lbamarch2005/v156g1.txt · Last modified: 2015/12/18 16:38 (external edit)