User Tools

Site Tools


lbaops:lbamarch2005:v156g1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbamarch2005:v156g1 [2005/03/12 22:20]
guest
lbaops:lbamarch2005:v156g1 [2005/03/13 07:10]
chris.phillips
Line 1: Line 1:
-===== v156g1 Setup:\\ ===== +===== v156g1 Setup:\ =====
- +
-^Antennas ​          | Mp-At-Cd-Ho-Pa |\\ +
-^Start ​             | 72 10:​00:​00 ​  |\\ +
-^Stop               | 72 21:​48:​00 ​  |\\ +
-^Channel 1          | 4808 - 4824 MHz USB RCP  |\ +
-^Channel 2          | 4808 - 4824 MHz USB LCP  |\ +
-^Bandwidth ​         | 16 MHz         |\\ +
-^Recorder ​          | S2             |\ +
-^S2 Mode            | 32x4-2 ​        |\\ +
-^DAS Mode           | at16s.pro ​     |\ +
-^Buggary Cable      | in             |\ +
-^Tape Change ​       | 72 15:​59:​00 ​  |\\ +
-----\\ +
-\\ +
-===== Comments:\\ ===== +
-Dodson\\ +
-\\ +
-1302-638 has recently gone through it's eclipse, and it is known that there are frequency jumps when this occurs. Therefore timing observations of 1302-638 are worthwhile.\\ +
-\\ +
-Emailed comments (repeating comments):​\\ +
-\\ +
-Files at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1 (NOT INCOMING!!!!)\\ +
-\\ +
-  Exp. Code:  v156g1\\ +
-\\ +
- ​Notes: ​   PSR B1259-63 observation No 7. Part 1 @ 4816MHz\\ +
-            Full pol. obs, i.e. both L&RCP. i.e buggery cable in\\ +
-            Pulsar binned at AT (unless a problem). All in CATIE.\\ +
-            CA CCC mode psr16_128-64. 12 hrs & 2 tape sets.\\ +
-\\ +
-   Both polarisations centred at 4816.\\ +
-\\ +
-    The experiment is ~ 12 hours so two sets of tapes are needed\\ +
-  Tape change is at ~16UT \\ +
-\\ +
-  ATCA has a pulsar polyco but it maybe out of date. \\ +
-\\ +
-  So Parkes will have to collect the filter bank so we can find the\\ +
-solution.\\ +
-\\ +
-------------\ +
-+
-  Version 3 (!)\ +
-+
-Failure of one IF at Parkes leads to a 1 pol 2 IF mode (i.e. vsop.pro)\ +
-Buggery out. Hart's failure means we use >>>>​ RCP <<<<​\ +
-New files are on  ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1\ +
-\+
  
 ^Antennas ​          | Mp-At-Cd-Ho-Pa |\ ^Antennas ​          | Mp-At-Cd-Ho-Pa |\
Line 54: Line 6:
 ^Channel 1          | 4800 - 4816 MHz USB RCP  |\ ^Channel 1          | 4800 - 4816 MHz USB RCP  |\
 ^Channel 2          | 4816 - 4832 MHz USB RCP  |\ ^Channel 2          | 4816 - 4832 MHz USB RCP  |\
-^Bandwidth ​         | 2x16 MHz         |\ +^Bandwidth ​         | 16 MHz         |\ 
-^Recorder ​          | S2             ​|\+^Recorder ​          | S2            |\
 ^S2 Mode            | 32x4-2 ​        |\ ^S2 Mode            | 32x4-2 ​        |\
 ^DAS Mode           | vsop.pro ​     |\ ^DAS Mode           | vsop.pro ​     |\
 ^Buggary Cable      | out             |\ ^Buggary Cable      | out             |\
 +\
 ^Tape Change ​       | 72 15:​59:​00 ​  |\ ^Tape Change ​       | 72 15:​59:​00 ​  |\
 +----\
 +\
 +===== Comments:\ =====
 +\
 +**NOTE**: Setup has changed. Now Rcp only and frequency shift\
 +\
 +Dodson\
 +\
 +1302-638 has recently gone through it's eclipse, and it is known that there are frequency jumps when this occurs. Therefore timing observations of 1302-638 are worthwhile.\
 +\
 +Emailed comments (repeating comments):\
 +\
 +Files at ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v156/​v156g1 (NOT INCOMING!!!!)\
 +\
 +  Exp. Code:  v156g1\
 +\
 + ​Notes: ​   PSR B1259-63 observation No 7. Part 1 @ 4816MHz\
 +            Full pol. obs, i.e. both L&RCP. i.e buggery cable in\
 +            Pulsar binned at AT (unless a problem). All in CATIE.\
 +            CA CCC mode psr16_128-64. 12 hrs & 2 tape sets.\
 +\
 +   Both polarisations centred at 4816.\
 +\
 +    The experiment is ~ 12 hours so two sets of tapes are needed\
 +  Tape change is at ~16UT \
 +\
 +  ATCA has a pulsar polyco but it maybe out of date. \
 +\
 +  So Parkes will have to collect the filter bank so we can find the\
 +solution.\
 +\
 +\
 +Schedule at ATCA has been prepared, but nowhere else. \
 +Pulsar observations at ATCA require three things:\
 +\
 +The CONFIG to be a pulsar one (psr16_128-64 in this case),\
 +MODE of the pulsar TARGET_NAME to be set to PSR and the polyco \
 +timing solution to be in caccc as ~corr/​cor/​pulsar/​TARGET_NAME.polyco\
 \ \
 +These are setup\
 \ \
-Schedule at ATCA has been prepared, but nowhere else. \\ 
-Pulsar observations at ATCA require three things:\\ 
-\\ 
-The CONFIG to be a pulsar one (psr16_128-64 in this case),\\ 
-MODE of the pulsar TARGET_NAME to be set to PSR and the polyco \\ 
-timing solution to be in caccc as ~corr/​cor/​pulsar/​TARGET_NAME.polyco\\ 
-\\ 
-These are setup\\ 
-\\ 
  
  
lbaops/lbamarch2005/v156g1.txt · Last modified: 2015/12/18 16:38 (external edit)