User Tools

Site Tools


lbaops:lbamarch2005:v156g1

This is an old revision of the document!


v156g1 Setup:\\

Antennas Mp-At-Cd-Ho-Pa
Start 72 10:00:00
Stop 72 21:48:00
Channel 1 4808 - 4824 MHz USB RCP
Channel 2 4808 - 4824 MHz USB LCP
Bandwidth 16 MHz
Recorder S2
S2 Mode 32×4-2
DAS Mode at16s.pro
Buggary Cable in
Tape Change 72 15:59:00

—-

Comments:\\

Dodson

1302-638 has recently gone through it's eclipse, and it is known that there are frequency jumps when this occurs. Therefore timing observations of 1302-638 are worthwhile.

Emailed comments (repeating comments):

Files at ftp://ftp.atnf.csiro.au/pub/people/vlbi/v156/v156g1 (NOT INCOMING!!!!)

Exp. Code:  v156g1\\


Notes: PSR B1259-63 observation No 7. Part 1 @ 4816MHz

          Full pol. obs, i.e. both L&RCP. i.e buggery cable in\\
          Pulsar binned at AT (unless a problem). All in CATIE.\\
          CA CCC mode psr16_128-64. 12 hrs & 2 tape sets.\\


 Both polarisations centred at 4816.\\


  The experiment is ~ 12 hours so two sets of tapes are needed\\
Tape change is at ~16UT \\


ATCA has a pulsar polyco but it maybe out of date. \\


So Parkes will have to collect the filter bank so we can find the\\

solution.

————\ \

Version 3 (!)\

\ Failure of one IF at Parkes leads to a 1 pol 2 IF mode (i.e. vsop.pro)\ Buggery out. Hart's failure means we use »» RCP ««\ New files are on ftp://ftp.atnf.csiro.au/pub/people/vlbi/v156/v156g1\ \

Antennas Mp-At-Cd-Ho-Pa
Start 72 10:00:00
Stop 72 21:48:00
Channel 1 4800 - 4816 MHz USB RCP
Channel 2 4816 - 4832 MHz USB RCP
Bandwidth 2×16 MHz
Recorder S2
S2 Mode 32×4-2
DAS Mode vsop.pro
Buggary Cable out
Tape Change 72 15:59:00

\ \ Schedule at ATCA has been prepared, but nowhere else.
Pulsar observations at ATCA require three things:

The CONFIG to be a pulsar one (psr16_128-64 in this case),
MODE of the pulsar TARGET_NAME to be set to PSR and the polyco
timing solution to be in caccc as ~corr/cor/pulsar/TARGET_NAME.polyco

These are setup

lbaops/lbamarch2005/v156g1.1110626449.txt.gz · Last modified: 2015/12/18 16:38 (external edit)