User Tools

Site Tools


lbaops:lbamay2005:vt01i1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbamay2005:vt01i1 [2005/05/14 01:59]
stingay
lbaops:lbamay2005:vt01i1 [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vt01i1 Setup:=====+===== vt01i1 Setup: ===== 
 + 
 +^Antennas ​          | At-Mp-Pa-Ho-Cd | 
 +^Start ​             | 134 11:​30:​00 ​  | 
 +^Stop               | 134 16:​30:​00 ​  | 
 +^PI                 | Steven Tingay | 
 +^Channel 1          | 2252 - 2268 MHz USB RCP DAS IFP1 | 
 +^Channel 2          | 2268 - 2284 MHz USB RCP DAS IFP1 | 
 +^Channel 3          | 2252 - 2268 MHz USB LCP DAS IFP2 | 
 +^Channel 4          | 2268 - 2284 MHz USB LCP DAS IFP2 | 
 +^Bandwidth ​         | 16 MHz         | 
 +^Recorder ​          | Disk (direct, not via S2)          | 
 +^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-b.html|vsop.pro]] | 
 +^Buggery cable      | out | 
 + 
 + 
 +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt01/​vt01i1]] 
 +---- 
 + 
 +===== Comments: ===== 
 + 
 +This is a "​pure"​ disk-based experiment:​ 
 + 
 +1) Connect DAS to VSIC directly (no buggery cable) and then on to PC; 
 + 
 +2) We run vsop.pro so that we get 2 x 16 MHz bands at each of RCP and LCP -> we therefore need both RCP and LCP IFs connected to the DAS (if dual pol available). ​ RCP on IFP1 and LCP on IFP2. 
 + 
 +3) To record: vsib_record -t 6h -s 2005-05-14T11:​30:​00 -o vt01i_<​antenna>​
  
-^Antennas ​          | At-Mp-Pa-Ho-Cd |\ 
-^Start ​             | 134 11:​30:​00 ​  |\ 
-^Stop               | 134 16:​30:​00 ​  |\ 
-^PI                 | Steven Tingay |\ 
-^Channel 1          | 2252 - 2268 MHz USB RCP DAS IFP1 |\ 
-^Channel 2          | 2268 - 2284 MHz USB RCP DAS IFP1 |\ 
-^Channel 3          | 2252 - 2268 MHz USB LCP DAS IFP2 |\ 
-^Channel 4          | 2268 - 2284 MHz USB LCP DAS IFP2 |\ 
-^Bandwidth ​         | 16 MHz         |\ 
-^Recorder ​          | Disk (direct, not via S2)          |\ 
-^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-b.html|vsop.pro]] |\ 
-^Buggery cable      | out |\ 
-\ 
-\ 
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt01/​vt01i1]]\ 
-----\ 
-\ 
-===== Comments:\ ===== 
-\ 
-This is a "​pure"​ disk-based experiment:​\ 
-\ 
-1) Connect DAS to VSIC directly (no buggery cable) and then on to PC;\ 
-\ 
-2) We run vsop.pro so that we get 2 x 16 MHz bands at each of RCP and LCP -> we therefore need both RCP and LCP IFs connected to the DAS (if dual pol available). ​ RCP on IFP1 and LCP on IFP2.\ 
-\ 
-3) To record: vsib_record -t 6h -s 2005-05-14T11:​00:​00 -o vt01i_<​antenna>​ 
lbaops/lbamay2005/vt01i1.1115999953.txt.gz · Last modified: 2015/12/18 16:38 (external edit)