User Tools

Site Tools


lbaops:lbamay2005:vt03a1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbamay2005:vt03a1 [2005/05/12 21:35]
stingay
lbaops:lbamay2005:vt03a1 [2015/12/18 16:38]
Line 1: Line 1:
-===== vt03a1 Setup:\\ ===== 
  
-^Antennas           | At-Mp-Pa-Ho-Bart(NZ) |\\ 
-^Start              | 132 22:00:00   |\\ 
-^Stop               | 133 01:00:00   |\\ 
-^PI                 | Gulyaev/Natusch/Tingay |\\ 
-^Channel 1          | 1650 - 1666 MHz USB RCP  |\\ 
-^Channel 2          | 1650 - 1666 MHz USB LCP  |\\ 
-^Bandwidth          | 16 MHz         |\\ 
-^Recorder           | disk via S2            |\ 
-^S2 Mode            | N/A         |\\ 
-^DAS Mode           | [[http://www.atnf.csiro.au/vlbi/dasmodes/16-1IF-2p-a.html|at16s.pro]] |\\ 
-^Buggary Cable      | out             |\\ 
-\\ 
-Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt03/vt03a1]]\\ 
-----\\ 
-\\ 
-===== Comments:\\ ===== 
-\\ 
-ATCA and Mopra telescope schedules in place\\ 
-\\ 
-Parkes .psn schedule at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt03/vt03a1\\ 
-\\ 
-Hobart VEX schedule at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt03/vt03a1\\ 
-\\ 
-This experiment should be setup as per the normal fringe-checking proceedure (as was used for vt02d1) i.e:\ 
-\ 
-1) Connect DAS to S2;\ 
-2) Connect S2 to VSIC and on to disk-based recorder via BG2 cable;\ 
-3) Use the following to record data: vsib_record -t 3h -c oxox -o <filename>\ 
-4)  
lbaops/lbamay2005/vt03a1.txt · Last modified: 2015/12/18 16:38 (external edit)